Mitsubishi Electronics FR-A700 ユーザーズマニュアル

3/24

BCN-C22005-634

· The parameters required to drive an MM-CF IPM motor are automatically changed as a batch.  (Refer to

Operation 

example

Initialize the parameter setting for an MM-CF IPM motor by selecting IPM in the parameter setting mode on the 
operation panel.

0

Parameter settings for a general-purpose motor

3003

Parameter settings for an IPM motor MM-CF (rotations per minute)

· Performing IPM parameter initialization by selecting IPM in the parameter setting mode on the operation panel

automatically changes the Pr. 998 IPM parameter initialization setting.

· In the initial parameter setting, the capacity same as the inverter capacity is set in Pr. 80 Motor capacity. (Refer to page

16.) To use a motor capacity that is one rank lower than the inverter capacity, set Pr. 80 Motor capacity before
performing IPM parameter initialization by selecting the mode on the operation panel.

· To set a speed or to display monitored items in frequency, set Pr. 998. (Refer to page 4.)

Display

Operation

Flicker ... Parameter setting complete!!

 Turn           to read another parameter.

 Press         twice to show the automatic parameter setting (AUTO).

 Press         to show the setting again.

The parameter 
number read 
previously appears.

P.RUN indicator is lit.

1. 

Screen at power-ON

 

The monitor display appears.

2. 

Parameter setting mode

 

Press        to choose the parameter setting 

mode.

3. 

Selecting the parameter

 

Turn         until            (IPM parameter 

initialization) appears.

4. 

Displaying the setting

 

Press        to read the currently set value. 

"    " (initial value) appears.

5. 

Selecting the setting

 

Turn        to change it to the set value

      "            ".

6. 

Parameter setting

 

Press        to set.

bcnc22005634.fm  3 ページ  ２０１２年７月３日　火曜日　午前９時４３分