Vertex Standard VX-177 ユーザーズマニュアル
VX-177 O
PERATING
M
ANUAL
31
M
EMORY
M
ODE
L
ABELING
M
EMORIES
You may wish to append an alpha-numeric “Tag” (label) to a memory or memories, to aid
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished
using the Set Mode.
1.
Recall the memory channel on which you wish to append a label.
2.
Press the [F] key, then press the [0(SET)] key to enter the Set mode.
3.
Rotate the DIAL knob to select Set Mode Item 29:
NM WRT
.
4.
Press the [F] key momentarily to display the previously
stored label (if any).
stored label (if any).
5.
Press the [F] key again to clear any previous label.
6.
Rotate the DIAL knob to select the first digit of the desired
label.
label.
7.
Press the [F] key to move to the next character.
8.
If you make a mistake, press the [
(MHz)] key to back-
space the cursor, then re-enter the correct letter, number,
or symbol.
or symbol.
9.
Repeat steps 5 through 7 to program the remaining letters,
numbers, or symbols of the desired label. A total of six charac-
ters may be used in the creation of a label.
numbers, or symbols of the desired label. A total of six charac-
ters may be used in the creation of a label.
10. When you have programmed a label which is under 6 characters,
press and hold in the [F] key for one second to confirm the label (if the label is exactly 6
characters in length, you do not need to press and hold in [F] key).
characters in length, you do not need to press and hold in [F] key).
11. When you have completed the creation of the label, press the
PTT switch to save the label and return to the memory recall
mode with labeled (alpha-numeric “Tag”) display.
mode with labeled (alpha-numeric “Tag”) display.
To disable the alpha-numeric Tag (enabling the frequency display):
1.
Set the VX-177 to the “MR” (Memory Recall) mode, and recall the memory channel
on which you wish to disable the alpha-numeric Tag.
on which you wish to disable the alpha-numeric Tag.
2.
Press the [F] key, then press the [0(SET)] key to enter the Set mode.
3.
Rotate the DIAL knob to select the Set Mode Item 28:
NAME
.
4.
Press the [F] key momentarily to enable adjustment of this Item’s
setting.
setting.
5.
Rotate the DIAL knob to set this Set Mode Item to “
FREQ
”
(enabling the frequency display).
6.
Press the PTT switch to save the new setting and activate the
alpha-numeric Tag.
alpha-numeric Tag.
To display the alpha-numeric Tag again, just repeat the above procedure, rotating the DIAL
knob to select “
knob to select “
ALPHA
” in step 5 above.
Set Mode Item 28:NAME is not applied to all memory channels at once (just
the channel on which you currently are operating).
the channel on which you currently are operating).