Kenwood TH-255A ユーザーズマニュアル
7
!0
[MON]
Press
[MON] to turn the Monitor function ON and OFF {page 62}.
Press
[F], [MON] to enter Squelch Level Adjustment mode {page
}.
!1
!1
Numeric Keypad
[1] Press [F], [1] to select the Signaling (Tone, CTCSS and DCS)
function {pages 20, 43, 46}.
[2] Press [F], [2] to enter the Tone frequency setup mode {page
2}.
Press
[F], [2] (1s) to start Tone frequency ID scan {page 22}.
[3] Press [F], [3] to change the Frequency step size {page 58}.
[4] Press [F], [4] to enter the DCS code setup mode {page 46}.
[4] Press [F], [4] to enter the DCS code setup mode {page 46}.
Press
[F], [4] (1s) to start DCS code ID scan {page 47}.
[5] Press [F], [5] to enter the CTCSS frequency setup mode {page
44}.
Press
[F], [5](1s) to start CTCSS frequency ID scan {page 44}.
Press
[5](1s) to turn the Speaker Attenuation function ON and
OFF {page 67}.
[6] Press [F], [6] to turn the Priority Scan ON or OFF {page 4}.
[7] Press [F], [7] to turn the Reverse function ON or OFF {page 24}.
[7] Press [F], [7] to turn the Reverse function ON or OFF {page 24}.
Press
[7] (1s) to turn the ASC function ON or OFF {page 24}.
[8] Press [F], [8] to select an Offset direction {page 9}.
[9] Press [F], [9] to turn Memory Channel Lockout ON or OFF {page
[9] Press [F], [9] to turn Memory Channel Lockout ON or OFF {page
42}.
[0] Press [0] (1.5s) to turn the Emergency siren ON or OFF {page
65}.
[ ] Press [ ] to illuminate the display {page 58}.
Press
[ ] (1s) to keep the light ON continuously. {page 58}.
[#] Press [#] to enter the Direct frequency entry mode {page 3}.
Press
[F], [#] to enter the Volume Adjustment Operation
Selection mode {page 0}.