Kenwood TH-255A ユーザーズマニュアル
0
S
witching
the
p
ower
on/oFF
1 Press [ ] (POWER) to switch the transceiver ON.
• The power on message momentarily appears on the display.
• If the transceiver power on password has been activated
• If the transceiver power on password has been activated
{page 67}, you must first enter your password before you can
operate the transceiver.
2 To switch the transceiver OFF, press [ ] (POWER) again.
A
djuSting
the
V
oluMe
Press
[UP] to increase the audio output level and press [DOWN] to
decrease the output level.
• If you are not receiving a signal, press and hold
• If you are not receiving a signal, press and hold
[MON] to
unmute the speaker, then adjust the volume control to a
comfortable audio output level.
V
oluMe
A
djuStMent
o
perAtion
S
election
With the setting described below, you can adjust the volume using
either the
[UP]/ [DOWN] keys or by operating the Selector.
1 Press [F], [#].
• The selected display appears.
BASIC OPERATION