ZyXEL Communications NWA-3550 ユーザーズマニュアル
Chapter 10 Wireless Security Screen
NWA-3500/NWA-3550 User’s Guide
153
10.4.2 Security: 802.1x Only
Use this screen to set the selected profile to 802.1x Only security mode. Select
802.1x-Only in the Security Mode field to display the following screen.
802.1x-Only in the Security Mode field to display the following screen.
Figure 95 Wireless > Security: 802.1x Only
The following table describes the labels in this screen.
Table 42 Wireless > Security: 802.1x Only
LABEL
DESCRIPTION
Profile Name
Type a name to identify this security profile.
Security Mode
Choose 802.1x Only in this field.
ReAuthentication
Timer
Timer
Specify how often wireless stations have to resend user names and
passwords in order to stay connected.
passwords in order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time
interval is 1800 seconds (30 minutes). Alternatively, enter “0” to turn
reauthentication off.
interval is 1800 seconds (30 minutes). Alternatively, enter “0” to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server
has priority.
has priority.
Idle Timeout
The NWA automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter
the user name and password again before access to the wired network
is allowed.
network after a period of inactivity. The wireless station needs to enter
the user name and password again before access to the wired network
is allowed.
The default time interval is 3600 seconds (or 1 hour).
Apply
Click Apply to save your changes.
Reset
Click Reset to begin configuring this screen afresh.