Furuno FAR-2167DS-BB ユーザーズマニュアル

This section provides the information necessary for setting and adjusting the radar, which is car-
ried out from the radar's menu system. Menus may be accessed from the keyboard or on-screen 
menu in case of Control Unit RCU-014, or on-screen menu in case of Control Unit RCU-015. 

The menu illustrations in this chapter show default settings in bold face.

1. Transmit the radar on 48 nm range.

2. Rotate the [GAIN] control until the value on the gain bar is 70-80.

3. Left-click the MENU box at the right side of the screen.

4. Spin the thumbwheel to choose 1 ECHO and then push the thumbwheel.

5. Spin the thumbwheel to choose 3 TUNE INITIALIZE.

6. Push the thumbwheel to initialize automatic tuning.

In a few moments echoes appear on the screen. The message "TUNE INITIALIZE" appears (in 
red) during automatic tuning. When this message disappears, the tuning is completed. If nec-
essary adjust the [GAIN] control to show echoes clearly.

7. Push the right button twice to close the menu.

 [ECHO] 
 
1 BACK 
2 2

ND

 ECHO REJ

 

OFF/ON 

3 TUNE INITIALIZE 
4 PM 

OFF/ON 

5 SART 
 OFF/ON 
6 WIPER 
 OFF/1/2 
7 ECHO AREA*

1

 

CIRCLE/WIDE/ALL

*

1 

Not available on IMO or A type radar

8  [PICTURE SELECT]