KitchenAid W10524723A ユーザーズマニュアル

For best results, the cookware should be centered above the 
burner with the bottom sitting level on the grate. The flame should 
be adjusted so that it does not extend up the sides of the pan.

When canning for long periods, alternate the use of surface 
burners between batches. This allows time for the most recently 
used areas to cool.

■

Center the canner on the grate above the burner. 

■

Do not place canner on 2 surface burners at the same time.

■

For more information, contact your local agricultural extension 
office, or refer to published home canning guides. Companies 
that manufacture home canning products can also offer 
assistance.

The normal operation of the range will include several noises that 
may be heard each time the Bake or Broil burners ignite during the 
cooking cycle:

■

gas valves may make a “popping” sound when opening or 
closing

■

igniters will “click” several times until a flame is sensed

■

a “poof” sound is heard when a Bake or Broil burner ignites

Odors and smoke are normal when the oven is used the first few 
times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to the 
fumes given off. Exposure to the fumes may result in death to 
certain birds. Always move birds to another closed and well-
ventilated room.

The display will flash when powered up or after a power loss. Press 
OFF to clear. When oven is not in use, the time of day is displayed.

Tones are audible signals, indicating the following:
One tone

■

Valid pad press

■

Oven is preheated (long tone)

■

Function has been entered

■

Reminder (on some models), repeating each minute after the 
end-of-cycle tones

■

Invalid pad press

■

End of cycle

Use the Options key to change the tone settings.

Many features of the oven control can be adjusted to meet your 
personal needs. These changes are made using the Options key.
Use the Options key to scroll through the features that can be 
changed. Each press of the Options key will advance the display to 
the next setting. After selecting the feature to be changed, the 
control will prompt you for the required input. After the setting is 
saved by pressing Start, the control will exit Options and display 
the time of day. Details of all of the feature changes are explained in 
the following sections.
Press OFF to exit Options.

The temperature is preset at Fahrenheit, but can be changed to 
Celsius. 
To change: 
1. Press OPTIONS until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

Turns off all tones, including the end of cycle tone and key press 
tones. Reminder tones are still active when all tones are disabled.
1. Press OPTIONS until “SOUNDS” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

Sets the pitch of the tone to either high or low.
1. Press OPTIONS until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press START to save the setting.
5. Press OFF to exit and display the time of day.

■

See stainless steel or cast iron.

■

Heats quickly, but unevenly.

■

A core or base of aluminum or copper 
on stainless steel provides even 
heating.