KitchenAid KESA907P プリント

ページ / 1
30" Freestanding and Slide-In Electric Range
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
KERA807P
KERK807P
KESA907P
KESI901P
KESV908P
Ref. 9762035
06-28-05
Because Whirlpool Corporation policy includes a continuous commitment to improve our
products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only.  For complete details, see Installation
Instructions packed with product.  Specifications subject to change without notice.
Electrical: When a 4-wire or 3-wire, single
phase 120/240 volt, 60 Hz, AC only electrical
supply is available, a 50-amp maximum circuit
protection is required (or, if specified on the
model/serial rating plate, when a 4-wire or 3-wire
single phase 120/208 volt 60 Hz, AC only
electrical supply is available, a 40-amp maximum
circuit protection is required), fused on both
sides of the line. A time-delay fuse or circuit
breaker is recommended. The model/serial rating
plate is located on the oven frame behind the
storage drawer panel. 
CABINET OPENING DIMENSIONS
*When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop; front of oven door protrudes 1
⁷⁄₈" (4.8 cm) beyond 
24" (61 cm) base cabinet.
A
B
C
D
E
F
A. 7
⁷⁄₈" (20 cm)
B. 30" (76.2 cm)
C. 43
⁷⁄₈" (111.4 cm)
overall height
D. 36" (91.4 cm) cooktop 
height with leveling legs 
lowered 1
¹⁄₂ turns
E. 30" (76.2 cm)
F. 27" (68,6 cm) to handle*
A. 35
⁵⁄₈" (90.5 cm) 
cooktop height with 
leveling legs lowered 
1
¹⁄₂ turns
B. 30 
¹¹⁄₁₆" (77.9 cm)
C. 30" (76.2 cm)
D. 27" 968.6 cm)*
E. 23
¹⁄₂" (59.8 cm)
A
B
C
D
E
*NOTE: 24" (61 cm) minimum when bottom of wood or metal cabinet is protected by not less than 
¹⁄₄" (0.64 cm) flame retardant 
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a hood above the range, follow the instructions for dimensional clearances above the cooktop surface.
A. 4" (10.2 cm) min. clearance 
from both sides of range to 
side wall or other combustible 
material
B. 18" (45.7 cm) upper cabinet to 
countertop
C. 13" (33 cm) max. upper cabinet 
depth
D. 30" (76.2 cm) min. opening 
width
E. For minimum clearance to 
the top of the cooktop,
see NOTE*.
F. 30" (76.2 cm) min. opening 
width
G. Junction box - 8" (20.3 cm) 
to 22" (55.9 cm) from either 
cabinet, 7" (17.8 cm) max. 
from door
H.
⁷⁄₈" (2.2 cm) min. required 
between cutout and cabinet 
door or hinge
A
B
C
D
E
F
G
H
E
A. 4" (10.2 cm) min. clearance 
from both sides of range to 
side wall or other 
combustible material
B. 18" (45.7 cm) upper cabinet 
to countertop
C. 13" (33 cm) max. upper 
cabinet depth
D. 30" (76.2 cm) min. opening 
width
E. For minimum clearance to 
the top of the cooktop,
see NOTE*.
F. 22
³⁄₄" (57.8 cm) opening depth
G. 30" (76.2 cm) min. opening 
width
H.
¹⁄₄" (6.2 cm) radius both corners
I. Junction box - 8" (20.3 cm) to 
22" (55.9 cm) from either 
cabinet, 7" (17.8 cm) max. from 
door
J.
⁷⁄₈" (2.2 cm) min. required 
between cutout and cabinet 
door or hinge
A
B
C
D
E
F
G
H
I
J
A. 4" (10.2 cm) min. clearance 
from both sides of range to 
side wall or other combustible 
material
B. 18" (45.7 cm) upper cabinet to 
countertop
C. 13" (33 cm) max. upper cabinet 
depth
D. 30" (76.2 cm) min. opening 
width
E. For minimum clearance to 
the top of the cooktop,
see NOTE*.
F. 30" (76.2 cm) min. opening 
width
G. Junction box - 8" (20.3 cm) 
to 22" (55.9 cm) from either 
cabinet, 7" (17.8 cm) max. 
from door
H.
⁷⁄₈" (2.2 cm) min. required 
between cutout and cabinet 
door or hinge
A. 4" (10.2 cm) min. clearance 
from both sides of range to 
side wall or other 
combustible material
B. 18" (45.7 cm) upper cabinet 
to countertop
C. 13" (33 cm) max. upper 
cabinet depth
D. 30" (76.2 cm) min. opening 
width
E. For minimum clearance to 
the top of the cooktop,
see NOTE*.
F. 22
³⁄₄" (57.8 cm) opening depth
G. 30" (76.2 cm) min. opening 
width
H.
¹⁄₄" (6.2 cm) radius both corners
I. Junction box - 8" (20.3 cm) to 
22" (55.9 cm) from either 
cabinet, 7" (17.8 cm) max. from 
door
J.
⁷⁄₈" (2.2 cm) min. required 
between cutout and cabinet 
door or hinge
®