Amana ARG7302 ユーザーズマニュアル
15
Adjust Oven Burner Flame
1.
1.
Remove storage drawer.
• See
• See
Removing Storage Drawer section.
2.
Locate and remove 2 screws attaching Z-shaped
cover plate.
• Cover plate located in center, rear of storage drawer
cover plate.
• Cover plate located in center, rear of storage drawer
cavity.
• Removing cover plate exposes oven burner orifice
and air shutter.
3.
Loosen air shutter lock screw and open or close air
shutter.
• If burner flame is blowing or noisy, reduce airflow to
shutter.
• If burner flame is blowing or noisy, reduce airflow to
burner.
• If burner flame is yellow and does not hold its
shape, increase airflow to burner.
• Tighten air shutter lock screw after adjusting.
4.
Replace cover plate and storage drawer.
A
B
C
A—Air Shutter Screw
B—Orifice Hood
C—Air Shutter
B—Orifice Hood
C—Air Shutter
Adjusting Oven Burner Flame
Broiler Flame
Radiant Screen Style
Broiler flame should appear hazy or fuzzy. Haze should
be no more than
Broiler flame should appear hazy or fuzzy. Haze should
be no more than
3
/
8
inch thick. The radiant screen should
begin to glow red or orange within 1–2 minutes.
Because broiler has a fixed orifice it can not be adjusted.
Broiler does not have an air shutter.
Broiler does not have an air shutter.