Electrolux EI30ES55JS ユーザーズマニュアル
10
Feature Overview
Installing Oven Rack Supports
ALWAYS INSTALL OVEN RACK
SUPPORT BEFORE TURNING ON
THE OVEN (WHEN THE OVEN IS
COOL).
SUPPORT BEFORE TURNING ON
THE OVEN (WHEN THE OVEN IS
COOL).
To install oven rack support,
insert the supports by pushing them
downward into the two brackets on
each side of the oven interior, as
shown below.
insert the supports by pushing them
downward into the two brackets on
each side of the oven interior, as
shown below.
To remove the oven rack support for
a self-clean cycle, pull up the support
to disengage them from the brackets. If
the rack supports are not removed, the
self-clean cycle won’t start.
a self-clean cycle, pull up the support
to disengage them from the brackets. If
the rack supports are not removed, the
self-clean cycle won’t start.
Oven Vents Location
The oven is vented above each door.
When the oven is on, warm air is
released through the vents. This venting
is necessary for proper air circulation in
the oven and good baking results.
When the oven is on, warm air is
released through the vents. This venting
is necessary for proper air circulation in
the oven and good baking results.
Oven Vent
Warm Air
Oven Rack Positions
This oven is equipped with ladder rack supports
with 8 positions to accommodate precisely every
mode of cooking.
with 8 positions to accommodate precisely every
mode of cooking.
OVEN RACK SUPPORTS & OVEN VENTS
Rack
positions
positions
POSITION 1
(NON-SLIDING
RACK ONLY)