Beko RBI 2302 F ユーザーズマニュアル

ページ / 89
14
EN
5
  Using your refrigerator
Thermostat setting button
The operating temperature is regulated 
by the temperature control.
Warm
Cold
1        2       3        4       5
(Or) Min.
Max.
1 = Lowest cooling setting 
(Warmest setting)
5 = Highest cooling setting 
(Coldest setting)
(Or)
Min. = Lowest cooling setting 
(Warmest setting)
Max. = Highest cooling setting 
(Coldest setting) 
The  average  temperature  inside  the 
fridge should be around +5°C.
Please  choose  the  setting  according 
to the desired temperature.
Please note that there will be different 
temperatures in the cooling area.
The  coldest  region  is  immediately 
above the vegetable compartment.
The interior temperature also depends 
on ambient temperature, the frequency 
with which the door is opened and the 
amount of foods kept inside.
Frequently  opening  the  door  causes 
the interior temperature to rise.
For  this  reason,  it  is  recommended 
to  close  the  door  again  as  soon  as 
possible after use.
The  interior  temperature  of  your 
refrigerator  changes  for  the  following 
reasons;
•  Seasonal temperatures,
•  Frequent opening of the door and
leaving the door open for long 
periods,
•  Food put into the refrigerator
without cooling down to the room 
temperature,
•  The location of the refrigerator in the
room (e.g. exposing to sunlight).
•  You may adjust the varying interior
temperature due to such reasons 
by using the thermostat. Numbers 
around the thermostat button 
indicates the cooling degrees.
•  If the ambient temperature is higher
than 32°C, turn the thermostat 
button to maximum position. 
•  If the ambient temperature is lower
than 25°C, turn the thermostat 
button to minimum position.