Vinotemp VINO2500-4500SSR ユーザーズマニュアル
- 16 -
If the function is enabled, the compressor is not energized for three minutes after
controller power up.
The function is also active in hot-gas defrost mode.
controller power up.
The function is also active in hot-gas defrost mode.
5) LED & Display Messages
1. LED
off
2. LED
on
3. LED blinking 0.5s on/0.5s off
4. LED blinking 0.5s on/1.5s off
5. Display
4. LED blinking 0.5s on/1.5s off
5. Display
A1
6. Display
A2
1. Compressor and defrost deactivated
2. Compressor
2. Compressor
energized
3. Defrost
activated
4. Sensor
fault
5. Regulation probe fault
6. Defrost probe fault
6. Defrost probe fault
3. Use of the Digital Controller
Fig. 3.3 Digital Controller
1) Display
During normal operating conditions, the display shows the value measured by
the air regulation probe. In case of active alarm, the temperature flashes
alternately to the code alarm.
1.1 LED Functions
1.2 Front Panel Commands