3D Innovations NC60 ユーザーズマニュアル
Control Panel Features
1-4
❖
DocuPrint NC60 System Administrator Guide
The Indicator Lights
The Control Panel contains six indicator lights. Table 1.1
describes the function of each light.
describes the function of each light.
Table 1.1
Control Panel indicator lights and their
functions
functions
Light
Description
Online
When the printer is On-line the light is On.
When the printer is Off-line, it is OFF. When
transitioning from On-line to Off-line, it flashes
at a rate of 2 times per second. It also flashes to
indicate that data are being processed by
Postscript, PCL or PJL, or are being spooled to
the disk (e.g. secure or proof job).
When the printer is Off-line, it is OFF. When
transitioning from On-line to Off-line, it flashes
at a rate of 2 times per second. It also flashes to
indicate that data are being processed by
Postscript, PCL or PJL, or are being spooled to
the disk (e.g. secure or proof job).
Press Enter
The light is flashing when the Enter key should
be pressed to:
be pressed to:
• Release a print job sent as a Hold Job.
• Release a PCL job where no End of Job has
been received (PCL Form Feed).
Black
Cyan
Magenta
Yellow
Cyan
Magenta
Yellow
Each light is on while the engine is processing
the corresponding toner color. When an out of
toner condition is encountered, the LED
corresponding to the low toner flashes.
the corresponding toner color. When an out of
toner condition is encountered, the LED
corresponding to the low toner flashes.