Electrolux 297122800 (0608) オーナーマニュアル

 

 

 

 

 

Interior & Door 

Liners 

•  Soap and water 
•  Baking soda and 

water 

•  Use 2 tablespoons of baking soda in 1 quart of warm water.  
•  Be sure to wring excess water out of sponge or cloth before cleaning around 

controls, light bulb or any electrical part. 

 

 

Door Gaskets 

•  Soap and water 

•  Wipe gaskets with a clean soft cloth. 

 

 

Drawers & Bins 

•  Soap and water 

•  Use a soft cloth to clean drawer runners and tracks. 
•  Do not wash any removable items (bins, drawers, etc.) in dishwasher. 

 

 

Glass Shelves 

•  Soap and water 
•  Glass cleaner 
•  Mild liquid sprays 

 

•  Allow glass to warm to room temperature before immersing in warm water. 

 

Exterior & Handles 

•  Soap and water 
•  Non Abrasive Glass 

Cleaner 

•  Do not use commercial household cleaners, ammonia, or alcohol to clean 

handles. 

•  Use a soft cloth to clean smooth handles.  
•  Do not use a dry cloth to clean smooth doors. 

 

 

Exterior & Handles 

(Stainless Steel 

Models Only) 

•  Soap and water 
•  Ammonia 
•  Stainless Steel 

Cleaners 

•  Never use CHLORIDE to clean stainless steel. 
•  Clean stainless steel front and handles with non-abrasive soapy water and a 

dishcloth. Rinse with clean water and a soft cloth. 

•  Wipe stubborn spots with an ammonia-soaked paper towel, and rinse. Use a 

non-abrasive stainless steel

 

cleaner. These cleaners can be purchased at 

most home improvement or major department stores. Always follow 

manufacturer's instruction.  

•  NOTE: Always, clean, wipe and dry with grain to prevent  cross-grain 

scratching. 

•  Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse 

well, and wipe dry with a clean soft cloth. 

 

 

NO

NO

NO

NO

NOTE

TE

TE

TE

TE

•

Turning the refrigerator temperature control to "OFF" turns off the
compressor, but does not disconnect electrical power to the light bulb or
other electrical components. To turn off power to your refrigerator, you must
unplug the power cord from the wall outlet.

•

Do not use razor blades or other sharp instruments which can scratch the
appliance surface when removing adhesive labels. Any glue left from tape
or labels can be removed with a mixture of warm water and mild detergent,
or, touch the glue residue with the sticky side of tape you have already
removed. Do not remove the serial plate.