Electrolux EI24BC65G ユーザーズマニュアル
8
Door Reversal
Reversing the Door
This model comes equipped with a right-hand (RH)
swing door. To convert the unit to a left-hand (LH)
swing door (as shown in the Use & Care Guide),
certain components must be obtained before
beginning the conversion. These components
are available from your local dealer or by calling
Electrolux.
swing door. To convert the unit to a left-hand (LH)
swing door (as shown in the Use & Care Guide),
certain components must be obtained before
beginning the conversion. These components
are available from your local dealer or by calling
Electrolux.
Order Part Number: 5303918374
(Models EI24WC65GS & EI24BC65GS)
To reverse the door:
1 Disconnect power to the wine cooler /
beverage center.
2 Remove toe grille.
3 Disconnect door harness from connector
bracket behind lower front panel. Pull
harness from behind lower front panel so it is
hanging below the door.
harness from behind lower front panel so it is
hanging below the door.
4 Remove upper RH hinge bracket by
loosening four (4) screws. Be careful to
support the door while loosening and
removing the upper hinge bracket.
support the door while loosening and
removing the upper hinge bracket.
5 Lift the door off of the lower RH hinge
bracket. Turn the door upside down and
place on a soft, non-abrasive surface.
place on a soft, non-abrasive surface.