Electrolux EI27BS26J B ユーザーズマニュアル

•

Product Weight – 360 Lbs.

•

An electrical supply with grounded three-prong receptacle is required. The
power supply circuit must be installed in accordance with current edition
of National Electrical Code (NFPA 70) and local codes & ordinances.

•

Voltage Rating – 120V / 60 Hz / 15 or 20 Amps

•

Connected Load (kW Rating) @ 120 Volts = 1.02 kW

•

Amps @ 120 Volts = 8.5 Amps

•

Always consult local and national electric & plumbing codes.

•

Floor should be level surface of hard material, capable of supporting fully
loaded refrigerator.

•

When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 120° to 180° door swing, providing
complete drawer / crisper access and removal. (Absolute 4-1/2" minimum
clearance will ONLY allow for 90° door swing which will provide
drawer / crisper access with restricted removal.)

•

To ensure optimum performance, avoid installing in direct sunlight or
close proximity to range, dishwasher or other heat source.

•

For proper ventilation, front grille MUST remain unobstructed.

•

Recess electrical outlet when possible.

•

Water recess on rear wall recommended to prevent water line damage.

•

Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).

•

Copper tubing with 1/4" O.D. recommended for water supply line with
length equal to distance from rear of unit to household water supply line
plus 7 additional feet. Optional Water Supply Installation Kits available.

•

Adjustable front rollers to assist with door alignment.

•

Minimum opening of 70-1/4" H x 36" W x 28-7/8" D required to allow for
ease of installation, proper air circulation, and plumbing / electrical
connections.

•

Remove all wall / floor molding prior to installation.

French Door Refrigerators