Frigidaire A01060901 オーナーマニュアル

5

This Use & Care Guide provides general operating 

instructions for your model.  Use the unit only 

as instructed in this Use & Care Guide.  Before 

starting the appliance, follow these important  

first steps.

1” (25 mm)

1” 

(25 mm)

⅜”

 

(10 mm)

⅜”

 

(10 mm)

You will need the following tools:

Phillips™

Head or

#2 Square Drive

Head

(OR)

AND

OR

Socket

Wrench Set

Adjustable

Wrench

OR

⅜" Fixed

Wrench

•  Choose a place that is near a grounded 

electrical outlet.  Do Not use an extension 

cord or an adapter plug.

•  If possible, place the unit out of direct 

sunlight and away from the range, 

dishwasher or other heat sources.

•  Install the appliance on a floor that is level 

and strong enough to support the unit fully 

loaded.

DO NOT install the appliance where the temperature will drop below 55°F (13°C) or rise above 

110°F (43°C).  The compressor will not be able to maintain proper temperatures inside the unit.
DO NOT block the kick plate on the lower front of your appliance.  Sufficient air circulation is 

essential for the proper operation of your unit.

Installation clearances:

•  Allow the following clearances for ease 

of installation, proper air circulation, and 

plumbing and electrical connections: 

 

Sides - 3/8 inch 

 

Top and Back - 1 inch

•  Allow for trim kit if it is to be installed with 

the unit.



If your unit is placed with the door hinge side 

against a wall, you may have to allow additional 

space so the door can be opened wider.

1. Remove handle from carton and any other 

protective packaging. 



The exterior walls of the appliance may become quite warm as the compressor works to transfer heat 

from the inside. Temperatures as much as 30ºF warmer than room temperature can be expected.