Frigidaire FFPT12F3MW ユーザーズマニュアル

4



The exterior walls of the refrigerator may become quite 

warm as the compressor works to transfer heat from 

the inside. Temperatures as much as 30° F warmer 

than room temperature can be expected. For this 

reason it is particularly important in hotter climates 

to allow enough space for air circulation around your 

refrigerator.

The refrigerator must have all bottom corners resting 

firmly on  solid floor. The floor must be strong enough 

to support a fully loaded refrigerator. NOTE:  It is Very 

Important for your refrigerator to be level in order to 

function properly.  If the refrigerator is not leveled during 

installation, the door may be misaligned and not close 

or seal properly, causing cooling, frost, or moisture 

problems.    

After removing all interior and exterior packaging 

materials, use a carpenter’s level to level the After 

discarding crating screws and wood base, use a 

carpenter’s level to level the refrigerator from front-to-

back. Adjust the plastic leveling feet in front, ½ bubble 

higher, so that the door closes easily when left halfway 

open.  from front-to-back. Adjust the leveling legs in 

front, ½ bubble higher, so that the door closes easily 
when left halfway open.

Wash any removable parts of the rrefrigerator  

interior, and exterior with mild detergent and warm 

water. Wipe dry. Do not use harsh cleaners on these 

surfaces.
Do not use razor blades or other sharp instruments,  

which can scratch the appliance surface when 

removing adhesive labels. Any glue left from the tape 

can be removed with a mixture of warm water and 

mild detergent, or touch the residue with the sticky 

side of tape already removed. Do not remove the 

serial plate.

Install the refrigerator in the coolest part of a dry 

and ventilated room, out of direct sunlight and away 

from heating ducts or registers. Do not place the 

refrigerator next to heat-producing appliances such 

as a range, oven or dishwasher. 
Level the refrigerator so the door close tightly.

Do not overcrowd the refrigerator or block cold air 

vents. Doing so causes the refrigerator to run longer 

and use more energy. Shelves should not be lined 

with aluminum foil, wax paper or paper toweling. 

Liners interfere with cold air circulation, making the 

wine cooler less efficient.
Wipe bottles and containers dry before placing them 

in the refrigerator. This cuts down on moisture build-

up inside the unit.
Organize the refrigerator to reduce door openings. 

Remove as many items as needed at one time and 
close the door as soon as possible.

This Use & Care Guide provides general operating 

instructions for your model. Use the refrigerator only as 

instructed in this Use & Care Guide. Before starting the 

  Choose a place that is near a grounded electrical 

• 

outlet. Do Not use an extension cord or an adapter 

plug.

  For the most efficient operation, the refrigerator 

• 

should be located where surrounding temperatures 

will not drop below 10° F (-12° C) or exceed 110° 

F (43° C). The Freeze Control Feature is designed 

to automatically maintain the selected interior 

refrigerator temperature within these boundaries.

  Allow space around the unit for good air circulation.  

• 

Leave a 2 inch (50 mm) space on the back, 1 inch 

(20 mm) on the sides, and 12 inches (300 mm) 

above the refrigerator for adequate circulation.

To allow door to close and seal properly, DO NOT let 

food packages extend past the front of shelves.