Frigidaire FPHG2399MF ユーザーズマニュアル

15

A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice 

Increases the production of ice

water filter 

Press and hold for three (3) seconds to reset after 

filter change.

C/F  

Touch to toggle display from Fahrenheit to Celsius.

default settings  Resets all refrigerator settings such as temp, temp 

display and tones to their factory default settings.

Power on-off 

Press and hold for three (3) seconds to turn off the 

cooling system to clean the refrigerator. It also turns off 

the ice maker. The temperature displays will read OFF.

Keep this switch set on energy saver (light on) for 

lowest energy usage. If moisture appears on the 

cabinet between the doors, pressing this button will 

turn the light off and enable an electric heater used to 

reduce moisture on the cabinet between the doors.

Setting cooling temperatures
Press the “∧” or “∨” indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The

display will time out after 10 seconds and return to the basic display.

Door Ajar  If the door has been left open for an extended period 

of time, an alarm will sound and the door ajar indicator 

will display on the bottom display of the control panel. 

The alarm is turned off by closing the door. The mute 

sounds key will blink to prompt the reset of any active 

alarms. Press this key to reset any system alarms.

High Temp   In the event of a high temperature condition, the tem-

perature display will blink and display “HI”. After 20 min-

utes, the alarm will sound and the high temp indicator 

will be red on the bottom of the control panel. The mute 

sounds icon will illuminate until pressed, acknowledging 

the alarm, at which time the highest temperature reached 

will be displayed and the refrigerator will resume normal 

operation. In case the high temp alarm is not acknowl-

edged at the first alarm sound time out, when the door is

first opened, the alarm sound will be repeated.

Power Fail  In the event of a power failure, the power fail alert will 

be displayed and the temperature display will blink until 

the mute sounds icon is pressed, acknowledging the 

alarm. Other modes may be turned off until the alarm is 

acknowledged. The power fail alert is turned off and 

the refrigerator will resume normal operation. The high 

Pressing the system on-off icon does not turn off power to your 

refrigerator. You must unplug the power cord from the wall outlet.