Frigidaire FGUS2645LF ユーザーズマニュアル

9

To remove the refrigerator doors:
  1  Trace lightly around the door’s top hinges 

with a pencil. This makes reinstallation 

easier.

  2  Disconnect the harness by grasping both 

sides of the connector firmly, depress the

latch, and pull apart. Remove the two (2) 

screws from the top hinge. Lift the door 

off of the bottom hinge and set it aside.

If your refrigerator will not fit through an

entrance area, you can remove the doors. 

Check first by measuring the entrance.
To prepare for removing the doors:
  1  Make sure the electrical power cord is 

unplugged from the wall outlet.

  2  Open the freezer drawer and remove the 

toe grille (see “Installation” section).

  3  Remove any food from the door shelves 

and close the doors.

To remove the top hinge covers:
  1  Remove the two (2) screws from each 

cover over the top door hinges.

  2  Lift inside edge of hinge cover and tilt 

back.



DO NOT remove the ground screw from 

hinge.

Rear

cover

screw

Ground

screw

Top

hinge

Front

cover screw

Top hinge

cover

Hinge

screws

Multi-wire

cables

Leave

hinge

with

door