Frigidaire FPHC2398LF ユーザーガイド

8

To ensure proper installation of handles, 

please review these instructions and 

illustrations thoroughly prior to installing 

the handles.

Wear gloves and safety goggles and use 

extreme CAUTION when installing these 

handles. The rounded end of the handles 

may be sharp (some models).

  1.  Remove handles from cartoning and 

any other protective packaging.

  2.  Position freezer handle end caps over 

upper and lower preinstalled shoulder 

bolts (A) that are fastened into door, 

ensuring the holes for the set screws 

are facing towards the refrigerator 

door.

 3.  While holding handle firmly against

door, fasten upper and lower allen set 

screws (B) with supplied allen wrench. 

  4.  Repeat steps 2 and 3 to install 

refrigerator handle. Ensure the holes 

for the set screws are facing towards 

the freezer door.



All set screws should be tightened and 

sub-flush (allen set screw should be seated

just below the surface of the end cap) of 

handle end cap. The end caps should be 

drawn tight to freezer  and refrigerator 

doors with no gaps.