Frigidaire 242046800 オーナーマニュアル

9

To remove the refrigerator doors:
  1  Trace lightly around the door’s top hinges with a 

pencil. This makes reinstallation easier.

  2  Disconnect the harness by grasping both sides of 

the connector firmly, depress the latch, and pull

apart.  Remove the two (2) screws from the top 

hinge. Lift the door off of the bottom hinge and set 

it aside. 

  3  Detach the water tube from the connector  

located behind the refrigerator and pull the tube 

back out to the front of the unit. The connector 

releases when you press inward on the outer 

sleeve while pushing the tube toward the 

connector then while continuing to hold in the 

sleeve, pull the tube away.

If your refrigerator will not fit through an entrance area,

you can remove the doors. Check first by measuring the

entrance. 
To prepare for removing the doors:
  1  Make sure the electrical power cord is unplugged 

from the wall outlet.

  2  Open the freezer drawer and remove the toe grille 

(see “Installation” section).

  3  Remove any food from the door shelves and close 

the doors.

To remove the top hinge covers:
  1  Remove the two (2) screws from each cover over 

the top door hinges.

  2  Lift inside edge of hinge cover and tilt back.



DO NOT remove the ground screw from hinge.