Frigidaire FFHT10F2LW ユーザーズマニュアル

7

1 Freezer Shelf

7 Crisper

2 Freezer Control

8 Leveling Leg

3 Refrigerator Control

9 Freezer Bins

4 Lamp Switch

10 Can Dispenser

5 Refrigerator Shelf

11 Refrigerator Bin (upper)

6 Crisper Cover

12 Refrigerator Bin (lower)

Multi-position adjustable interior shelves can be moved 

to any position for larger or smaller bottles. The shipping 

spacers that stabilize the shelves for shipping should be 

removed and discarded.

A Slide-Out Basket (some models) located at the bottom 

of the refrigerator, provides separate storage space for 

items that are difficult to store on refrigerator shelves. To 

remove the basket, pull out and lift up.

The Freeze Control Feature will maintain proper interior 

refrigerator temperature even when the refrigerator is 

placed in an area where the surrounding temperature 

drops down to 10° F (-12° C).

The light comes on automatically when the door is 

opened. To replace the light bulb, turn the temperature 

control to OFF and unplug the electrical cord. Replace the 

old bulb with a bulb of the same wattage.

1

2

3

4

7

5

6

8

9

10

11

12

For best performance, allow 4 hours for the refrigerator 

to cool down completely. The refrigerator will run 

continuously for the first several hours. 

The temperature control is located inside the refrigerator 

and in the freezer compartment on some models. The 

temperature is factory preset to provide satisfactory food 

storage temperatures. However, the temperature control 

is adjustable to provide a range of temperatures for your 

personal satisfaction.  
To adjust the temperature colder in the refrigerator 

compartment, press the (-) on the Refrigerator Control 

panel towards a lower temperature. To adjust the 

temperature colder in the freezer compartment, move 

the Freezer Control knob towards COLDER. After each 

movement, allow 24 hours for the unit to adjust. If 

the unit is still not cold enough, repeat until desired 

temperature is achieved. After each movement of the 

control knob, allow the unit to adjust for 24 hours.
To adjust the temperature warmer in the refrigerator 

compartment, press the (+) on the Refrigerator Control 

panel. To adjust the temperature warmer in the freezer 

compartment, move the Freezer Control knob towards 

COLD. After each movement, allow 24 hours for the unit 

to adjust. If the unit is still not warm enough, repeat until 

desired temperature is achieved. After each movement of 

the control knob, allow the unit to adjust for 24 hours.

SETTING THE TEMPERATURE CONTROL

SEtt INg   th E  tEMPERAt URE c ONt ROL

For safe food storage, allow 4 hours for the refrigerator to

cool down completely. The refrigerator will run continuously

for the first several hours.

The first time you turn the unit on, set the temperature

control to “COLDER” in the refrigerator compartment and

normalin the freezer compartment.

The range of the temperature controls in both the

refrigerator and freezer compartments is from “COLD”, the

warmest, to “COLDER”, the coldest. After 24 to 48 hours,

adjust the temperature control to the setting that best suits

your needs. The setting of nornal in refrigerator section

and normal ”

 in freezer section should be correct for home or

offce use.

 

•

Do not set the FREEZER temperature control 

to the COLDEST setting as this will cause the 

refrigerator to cease cooling.

  If the unit is unplugged, has lost power, or 

is turned off, you must wait 3 to 5 minutes 

before restarting the unit. If you attempt to 

restart before this time delay, the refrigerator 

will not start.

  Turning the REFRIGERATOR temperature 

control to the “OFF” position stops the cooling 

cycle but does not shut off the power to the 

unit.”