Frigidaire FGHF2366PF オーナーマニュアル

ページ / 33
28
CARE & CLEANING
Care and cleaning tips
Part
Cleaning Agents
Tips and Precautions
Interior & 
Door Liners
• Soap and water
• Baking soda and 
water
• Use two tablespoons of baking soda in one quart of warm water.
• Be sure to wring excess water out of sponge or cloth before cleaning 
around controls, light bulb or any electrical part.
Door 
Gaskets
• Soap and water
• Wipe gaskets with a clean soft cloth.
Drawers & 
Bins
• Soap and water
• Use a soft cloth to clean drawer runners and tracks.
• Do not wash any removable items (bins, drawers, etc.) in dishwasher.
Glass 
Shelves
• Soap and water
• Glass cleaner
• Mild liquid sprays
• Allow glass to warm to room temperature before immersing in warm water.
Toe Grille
• Soap and water
• Mild liquid sprays
• Vacuum
• Remove toe grille (see Installation Instructions).
• Vacuum both sides and wipe with sudsy cloth or sponge. Rinse and dry.
Exterior & 
Handles
• Soap and water
• Non abrasive glass 
cleaner
• Do not use commercial household cleaners containing ammonia, bleach or 
alcohol to clean handles.
• Use a soft cloth to clean smooth handles.
• Do not use a dry cloth to clean smooth doors.
Exterior & 
Handles 
(Stainless 
Steel Models 
Only)
• Soap and water
• Stainless steel 
cleaners
• Never use CHLORIDE or cleaners with bleach to clean stainless steel.
• Clean stainless steel front and handles with non-abrasive soapy water and 
a dishcloth. Rinse with clean water and a soft cloth.
• Use a non-abrasive stainless steel cleaner. These cleaners can be 
purchased at most home improvement or major department stores. Always 
follow manufacturer’s instruction. Do not use household cleaners containing 
ammonia or bleach. 
NOTE: Always clean, wipe and dry with grain to prevent scratching.
• Wash the rest of the cabinet with warm water and mild liquid detergent. 
Rinse well and wipe dry with a clean soft cloth.
Ice Chute Extension 
(select models)
The ice chute extension is 
designed to better direct 
ice flow into containers.
Removing the Ice 
Chute Extension 
For Cleaning
  1  Turn the refrigerator 
off using the button 
on the control 
panel (refer to the 
“Controls” section of 
this Manual).
  2  Press inward firmly
on the front of the 
chute and pull down.
  3  Turn your 
refrigerator back on.
Push Upward Until the
Extension Snaps In Place
Pull Down
Press Here
Firmly
Installing the Ice 
Chute Extension
  1  Turn the refrigerator off 
using the button on the 
control panel (refer to 
the “Controls” section of 
this Manual).
  2  Align the extension with 
the ice chute so that the 
snap clips are just inside 
the front edge of the chute.
  3  Push upward until the extension snaps into place.
  4  Turn your refrigerator back on.