Zanussi ZFD 50/17 R ユーザーズマニュアル

ページ / 19
17
MAINTENANCE AND CLEANING
Before any maintenance or cleaning work is carried 
out, DISCONNECT the appliance from the 
ELECTRICITY supply.
Internal cleaning
Clean the inside and accessories with warm water and 
bicarbonate of soda (5ml to 0.5 litre of water). Rinse 
and dry thoroughly.
 NEVER USE DETERGENTS, ABRASIVE 
POWDERS, HIGHLY PERFUMED CLEANING 
PRODUCTS OR WAX POLISHES, TO CLEAN 
THE INTERIOR AS THESE WILL DAMAGE THE 
SURFACE AND LEAVE A STRONG SMELL.
Clean the drain hole of the water trough at regular 
intervals and make sure that the drain hole is never 
obstructed, so that the defrost water may flow freely.
External cleaning
Wash the outer cabinet with warm soapy water. Do 
NOT use abrasive products.
Once or twice a year dust the condenser (black grill) 
and the compressor at the back of the appliance, with 
a brush or vacuum cleaner, see Fig. 9.
Fig. 9
You MUST ensure that the appliance is switched 
OFF. An accumulation of dust will affect the 
performance of the appliance and cause excessive 
electricity consumption.
D280
CONDENSER
COMPRESSOR
DEFROST
TRAY
When the appliance is not in use
When the appliance is not in use for long periods, 
disconnect from the electricity supply, empty all 
foods and clean the appliance, leaving the doors ajar 
to prevent unpleasant smells.
Changing the light bulb
Should the interior light fail to work, first switch off 
the appliance and disconnect from the electricity 
supply, then replace the bulb as follows;
Fig. 10
unscrew the light cover and then pull it outward by 
pressing as shown in the Fig. 10. Unscrew the bulb 
and replace it with a new 15 watt bulb (available from 
your nearest Zanussi Service Force Centre).
Replace the light cover by sliding it into its original 
position and replacing the screw.
D411
GB