Kelvinator KCGM47RB ユーザーズマニュアル
Product Registration
These instructions include information which is
intended to assure the operator of correct installation,
operation and service. Before attempting installation,
adjustment or maintenance, be certain of the following:
That you have read and fully understand the
intended to assure the operator of correct installation,
operation and service. Before attempting installation,
adjustment or maintenance, be certain of the following:
That you have read and fully understand the
instructions.
That you have all the tools required and are trained
to use them.
That you have met all installation and usage
restrictions and are familiar with the functions and
operations of the unit.
operations of the unit.
That you follow all instructions exactly as given.
All the fittings, measurements, recommendations and
procedures are significant. Substitutions and
approximations must be avoided. Improper handling,
maintenance, installation and adjustment, or service
attempted by anyone other than a qualified technician,
may void the future warranty claims and cause damage
to the unit and/or result in injury to the operator and/or
bystanders.
Record your Model and Serial Numbers
Record the model number and serial number of this
appliance in the space provided below (the serial plate
is located inside the cabinet compartment).
All the fittings, measurements, recommendations and
procedures are significant. Substitutions and
approximations must be avoided. Improper handling,
maintenance, installation and adjustment, or service
attempted by anyone other than a qualified technician,
may void the future warranty claims and cause damage
to the unit and/or result in injury to the operator and/or
bystanders.
Record your Model and Serial Numbers
Record the model number and serial number of this
appliance in the space provided below (the serial plate
is located inside the cabinet compartment).
Register Your Product
The self‐addressed PRODUCT REGISTRATION CARD
(shown above) should be filled in completely, signed
and returned to the address provided.
The self‐addressed PRODUCT REGISTRATION CARD
(shown above) should be filled in completely, signed
and returned to the address provided.
SAFETY / WARNING
Please pay close attention to the safety notices in this
section. Disregarding these notices may lead to serious
injury and/or damage to the unit.
section. Disregarding these notices may lead to serious
injury and/or damage to the unit.
ATTENTION
To minimize shock and fire hazards, be sure not to
overload outlet. Please designate one outlet for
your unit.
your unit.
Do not use extension cords.
Do not put your hands under the unit when the unit
Do not put your hands under the unit when the unit
is required to be moved.
When the unit is not in use for a long period of
time, please unplug the unit from the outlet.
After unplugging the unit, wait at least 10 minutes
before re‐plugging it. Failure to do so could cause
damage to the compressor.
damage to the compressor.
UNPLUG CORD
To minimize shock and fire hazards, please do not
plug or unplug the cord with wet hands.
During maintenance and cleaning, please unplug
the unit.
PROPER GROUNDING REQUIRED
To minimize shock and fire hazards, make sure that
the unit is properly grounded.
2