KitchenAid 9871780C ユーザーズマニュアル

Installer: Leave Use and Care Guide with the homeowner.

Homeowner: Keep Use and Care Guide for future reference and 
for local electrical inspector’s use, if required.

■

Do not grasp console to move compactor.

■

Begin in the room where the compactor will be located.

1. Remove compactor from shipping carton. Remove all 

protective packaging materials such as tape and shipping 
pads. Use a mild detergent and warm water to remove waxy 
residue caused by protective shipping material. Dry 
thoroughly with a soft cloth. For more information, see 
“Cleaning.”

2. Be sure the power cord is attached to the cord clip on the 

rear of the compactor.

3. Place the 2 corner posts from the carton on the floor near the 

compactor. Open the compactor drawer and remove any 
shipping materials or other items from the drawer. Do not 
remove the compactor bag. Grasp the handle and raise the 
front of drawer until it clears the drawer stops. Grasp sides of 
drawer and lift drawer out of compactor. Place the drawer on 
the 2 corner posts. 

4. Place the other 2 corner posts on the floor to the side of the 

compactor. Grasp the sides of the compactor cabinet and put 
compactor on its side on top of the corner posts. Remove the 
shipping base from the bottom of the compactor. 

A

B

A