Multiquip MVC80VH/VHW ユーザーズマニュアル

Figure 1 shows the location of the basic controls and components
of the MVC80VH/VHW Plate Compactor. The function of each
control  is described below:

1.

Water Tank Cap (VHW Only) – Remove this cap to add
water to the water tank.

2.

Fuel Tank Cap – Remove this cap to add fuel.

3.

Lifting Bale – When lifting of the compactor is required
either by forklift, crane etc., tie rope or chain around this
lifting point.

4.

Handle Bar  – When operating the compactor use this
handle bar  to maneuver  the compactor.

5.

Gasoline Engine – This plate compactor uses a HONDA
GX160U1SM12 engine. Refer to the HONDA owner's
manual for  engine information and related topics.

6.

Belt Cover – Remove this cover to gain access to the
V-belts. NEVER run the compactor without the V-belt cover.
If the V-belt cover is not installed, the possibility exists that
your hand may get caught between the V-belt and clutch,
causing serious injury and bodily harm.

7.

Vibrating Plate – A flat, open plate made of durable cast
iron construction used in the compacting of soil.

8.

Vibration Case – Encloses the eccentric, gears and
counter weights.

9.

Water Shut-Off Valve (VHW only) – Turn this valve
downward to let water flow from the water tank to the water
tube.

10. Water Tank (VHW only) – Holds 13.8 quarts of water

(removable, no tools required).

4

3

5

2

8

6

7

1

10

9

WATER TANK

(MVC-80VHW ONLY)