Franke Consumer Products FCR 708-H TC ユーザーズマニュアル
EN
8
8
USE
Control panel
Button Function
Display
A
Carriage Closed: If the button is pressed and held for at
least 1.5 seconds, the Carriage opens, the Motor starts
at speed 2 and the Lights turn on at maximum intensity.
least 1.5 seconds, the Carriage opens, the Motor starts
at speed 2 and the Lights turn on at maximum intensity.
Carriage Open: If the button is pressed briefly the
Motor turns on/off. If the button is pressed and held for
at least 1.5 seconds, the Carriage closes and the Motor
switches off.
Motor turns on/off. If the button is pressed and held for
at least 1.5 seconds, the Carriage closes and the Motor
switches off.
Displays the set speed, 2 LED indicators per speed.
N.B. If the Carriage blocks while closing due to
obstacles or the like, it will block for 1 second and will
then open again.
N.B. If the Carriage blocks while closing due to
obstacles or the like, it will block for 1 second and will
then open again.
B
Decreases the working speed.
Only active with the Carriage open.
Only active with the Carriage open.
The number of lighted segments decreases.
C
Increases the working speed.
Only active with the Carriage open.
The number of lighted segments increases.
D
Activates Intensive speed from any other speed, with
the exception of Delay. This speed is set to operate for
10 minutes, after which the system returns to the speed
that was set before. Suitable to deal with maximum
levels of cooking fumes.
the exception of Delay. This speed is set to operate for
10 minutes, after which the system returns to the speed
that was set before. Suitable to deal with maximum
levels of cooking fumes.
The indicator I flashes and all the segments on the
Display are lit.
It is disabled by pressing the Button.
Display are lit.
It is disabled by pressing the Button.
E
Can only be activated if Intensive and Delay are Off.
Starts the Motor at a speed that allows suction of 100
m3/h for 10 minutes per hour, after which the Motor
will stop (24H function).
Starts the Motor at a speed that allows suction of 100
m3/h for 10 minutes per hour, after which the Motor
will stop (24H function).
Carriage Closed: If the button is pressed briefly the
function is activated.
function is activated.
With the function active, if the Motor On/Off button is
pressed and held for at least 1.5 seconds, the function is
disabled, the Carriage opens, the Motor starts at speed 2
and the Lights turn on at maximum intensity.
Carriage Open: If the button is pressed briefly the
Motor switches off, the Carriage closes and the
function is activated.
pressed and held for at least 1.5 seconds, the function is
disabled, the Carriage opens, the Motor starts at speed 2
and the Lights turn on at maximum intensity.
Carriage Open: If the button is pressed briefly the
Motor switches off, the Carriage closes and the
function is activated.
Displays 24 and the segments on the Display all light
up and then turn off one at a time in cycle.
It is disabled by pressing the Button or the Motor
On/Off button (button A).
up and then turn off one at a time in cycle.
It is disabled by pressing the Button or the Motor
On/Off button (button A).
F
Can only be activated if Intensive or 24H are Off.
Activates automatic switch-off with a 30’ delay.
Suitable to complete elimination of residual odours.
Activates automatic switch-off with a 30’ delay.
Suitable to complete elimination of residual odours.
Displays a flashing Clock symbol.
It is disabled by pressing the button or turning the
motor off.
It is disabled by pressing the button or turning the
motor off.
G
Performs a Reset of the Filter saturation alarm when
the Button is pressed for approximately 2 seconds with
Motor and Lights Off.
the Button is pressed for approximately 2 seconds with
Motor and Lights Off.
After 100 hours in operation the Drop symbol is
displayed to indicate saturation of the Metal Grease
Filters.
After 200 hours in operation the letter
displayed to indicate saturation of the Metal Grease
Filters.
After 200 hours in operation the letter
C
is displayed to
indicate saturation of the Activated Charcoal filters.
H
Decreases the intensity of the Lighting each time the
Button is pressed, in cycle.
Button is pressed, in cycle.
I
Turns the lighting system on and off at maximum
intensity.
intensity.
L
Increases the intensity of the Lighting each time the
Button is pressed, in cycle.
Button is pressed, in cycle.
Keyboard Lock: it is possible to lock the keyboard, for example when cleaning the Glass surface, when the Hood has Motor and
Lights turned off.
Press D (Intensive) for approximately 5 Seconds to enable or disable the Keyboard Lock, which is always confirmed by a Beep
and an animation on the display Motor bar.
Lights turned off.
Press D (Intensive) for approximately 5 Seconds to enable or disable the Keyboard Lock, which is always confirmed by a Beep
and an animation on the display Motor bar.
B
A
D
C
E
G
F
I
H
L