Electrolux 318 201 018 ユーザーズマニュアル
7
Setting Control
SETTING WARMER DRAWER CONTROLS
To Set the Controls
The digital controls are used to set the temperature of the warmer drawer. It is
located at the right side of the warmer drawer in the open position.
located at the right side of the warmer drawer in the open position.
To Power-Up the Controls
On the first power-up or after a power interruption, the unit will flash “88:88°”
in the display. Press the ON-OFF pad twice. The display will show “----”,
prompting to press another pad. If no other pad is touched, the unit will power
off after a few seconds.
in the display. Press the ON-OFF pad twice. The display will show “----”,
prompting to press another pad. If no other pad is touched, the unit will power
off after a few seconds.
To Set the Target Temperature
To select the lowest (90°F) warming temperature available, press the -lo pad
and wait for the a few seconds for the acceptance delay. A second press of -lo
will lower the temperature to Bread Proof, displayed by a “brPF” in the screen.
The Bread Proof function can also be accessed at any time by pressing the
and wait for the a few seconds for the acceptance delay. A second press of -lo
will lower the temperature to Bread Proof, displayed by a “brPF” in the screen.
The Bread Proof function can also be accessed at any time by pressing the
Warmer Drawer Recommended
Food Settings Chart
Food Item
Setting
Bacon
190°F
Biscuits
170°F
Casseroles
170°F
Eggs
170°F
Empty Dinner Plates
140°F
Fish, Seafood
170°F
Fried Foods
190°F
Gravies, creams, sauces
170°F
Ham
170°F
Hamburger Patties
190°F
Pancakes, Waffles
190°F
Pastries
170°F
Pies
170°F
Pizza
190°F
Pork Chops
190°F
Potatoes (baked)
190°F
Potatoes (mashed)
170°F
Poultry
190°F
Roasts (Beef, Pork, Lamb) 170°F
Rolls, soft
Rolls, soft
140°F
Rolls, hard
170°F
Vegetables
170°F
pad. To select the highest (210°F) warming temperature available,
press the +hi pad and wait for the few seconds acceptance delay.
For any temperature between the lowest (90°F) and the highest
(210°F), press the +hi or -lo pads until the desired temperature is
displayed. The pads will adjust the target temperature by 10°F steps
each time it is pressed. When the desired temperature is set, wait a
few seconds for the controls to accept the input. The display will show
the temperature rising to the target temperature and will sound a
chime when it is reached. It is recommended to let the unit pre-heat
for 10-15 minutes before placing meal in it.
press the +hi pad and wait for the few seconds acceptance delay.
For any temperature between the lowest (90°F) and the highest
(210°F), press the +hi or -lo pads until the desired temperature is
displayed. The pads will adjust the target temperature by 10°F steps
each time it is pressed. When the desired temperature is set, wait a
few seconds for the controls to accept the input. The display will show
the temperature rising to the target temperature and will sound a
chime when it is reached. It is recommended to let the unit pre-heat
for 10-15 minutes before placing meal in it.
To Warm Serving Bowls and Plates
Heat bowls and plates on the 140°F setting. Place empty dishes on
the rack to raise them off drawer bottom. To further heat dishes or to
heat fine china, check with the manufacturer for maximum heat
tolerance.
the rack to raise them off drawer bottom. To further heat dishes or to
heat fine china, check with the manufacturer for maximum heat
tolerance.
Auto-Shutdown
This unit is programmed to automatically shutdown after 4 hours it is
left on. The element will stop warming the drawer, the indicator light
will turn off and the electronic display will show an “OFF” message,
to remind the user that the unit auto-shutted off by itself.
left on. The element will stop warming the drawer, the indicator light
will turn off and the electronic display will show an “OFF” message,
to remind the user that the unit auto-shutted off by itself.