Sharp TINSEB520MRK0 ユーザーズマニュアル

ページ / 12
8
COntinuOus On MODe
When the Warming Drawer is in Continuous On mode, it will  
remain on until turned off manually. To avoid a fire hazard or
burns, exercise caution when operating the unit in Continuous  
On mode. Touch POWER to turn the unit off.
autO sHut-OFF
Do not block the humidity vents on the back of the drawer 
front and along the left and right sides of the drawer. Excessive 
heat buildup can occur.
raCk
A  wire  rack  is  included 
to use for double stacking 
items.
The rack will fit from front
to  back  or  from  side  to 
side.
Preheat with the rack in place.
The use of accessory attachments not recommended by 
Sharp may cause injuries.
Always place racks in desired position while drawer is cool. 
If racks must be removed while Warming Drawer is hot, do 
not let the potholder contact the heating elements.
DO NOT USE
 aluminum foil to line any part of the 
Warming Drawer. Using a foil liner could result in a fire
hazard, or the obstruction of the flow of heat and ventilation
air. Foil is an excellent heat insulator and heat will be 
trapped underneath it. This trapped heat can upset the 
performance of the Warming Drawer parts.
DO NOT
 place more than 50 pounds in the drawer.
CautiOn
 
 Plastic containers or plastic wrap can melt if 
in direct contact with the drawer or a hot utensil. Items may 
melt and cause damage to the Warming Drawer or injury.
WarMinG DraWer use
eleCtrOniC tOuCH COntrOls
Press 
POWER  to  turn  the  Warming 
Drawer on and off. Signal light will indicate 
when unit is on.
tO seleCt DesireD 
teMperature
Select  temperature  by  pressing 
TEMP 
until indicator light is on next to desired 
temperature.
tO seleCt DesireD tiMe
Select from five preset times or Continuous
On by pressing TIME until light is on next 
to desired time.
Use caution when selecting Continuous On. 
Unit will need to be turned off using the 
POWER key.
preHeatinG
Allow time for the drawer to preheat.
For best results, preheat your Warming Drawer according to 
the chart below before use. If you put hot food into a cool, 
confined area, any steam that is present will condense. If you
preheat your Warming Drawer, there will be less chance of 
water due to condensation. Preheat times vary depending on 
the temperature setting.
teMperature
settinGs
apprOxiMate tiMe
90˚
Proof
Preheat Not Required
125˚
Low
8 minutes
150˚
12 minutes
175˚
Medium
16 minutes
200˚
19 minutes
230˚
High
24 minutes
On/Off
Temp.
Time
POWER
90° Proof
125° Low
150°
175° Med.
200°
230° High
1/2 Hour
1 Hour
2 Hours
3 Hours
4 Hours
Continuous On