Mitel 5340 ユーザーズマニュアル
Cordless Devices
Page 90
Mitel
®
5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013
Cordless Headset Alerting Tones and LEDs
The cordless headset provides the following alerting tones:
There are two LEDs associated with the cordless headset:
•
Blue – Indicates the operational status of the headset
•
Green – Indicates the status of the electrical charge of the battery
The handset is blinking, when the LED is on and off for an equal amount of time. The handset is
winking, when the LED is on for a short period of time and off for a longer period of time.
winking, when the LED is on for a short period of time and off for a longer period of time.
Mute ON/OFF
2-pitch tone occurs immediately. Reminder tone occurs
30 seconds after activation and then regularly until
deactivated.
30 seconds after activation and then regularly until
deactivated.
Mute key on Phone ON/OFF
No immediate tone. Reminder tone occurs 30 seconds
after activation and then regularly until deactivated.
after activation and then regularly until deactivated.
Low battery (within 10 minutes left) 3 beeps and 20 second pause
Low battery (within 2 minutes left)
3 rapid beeps and 1.5 second pause
Out of range
Repetitive 3-pitch tone until you are back in range. Note:
If you are out of range for more than 10 seconds, any call
that is in progress is dropped and not recovered.
If you are out of range for more than 10 seconds, any call
that is in progress is dropped and not recovered.
Led Color
LED State
Indicates
Blue (on
headset)
headset)
Solid
Headset microphone is muted.
Blinking
Headset is in pairing mode.
Winking
Active audio path between Headset and
Module.
Module.
Solid for 2 seconds
Indicates one of the following:
•
Pairing successful
•
New battery installed
Green (on
cradle)
cradle)
Solid
Battery is fully charged.
Blinking
Battery is charging.
Winking
Indicates low voltage when headset is
uncradled.
uncradled.
Off
When headset is cradled, indicates battery is
not charging.
not charging.