Mitel 5340 ユーザーズマニュアル
Getting Started
Page 8
Mitel
®
5320/5330/5340 IP Phone User Guide – Release 5.0, April 2013
Viewing the Phone Information
You can use the phone to view system or phone information.
To view system information:
1. Press
(Applications).
2. Press
Settings, and then press About 5320/5330/5340 IP Phone. A screen similar to
the following appears.
3. Press
Close to exit the Applications menu.
Using a Headset
When using a headset, press
(Speaker) to connect to or disconnect from calls. The
Headset icon
appears when the headset is in use. You cannot use the handset or
speakerphone when the IP phone is in Headset Mode. Disconnecting the headset automatically
enables the handset.
enables the handset.
To connect and activate the headset:
1. Insert the headset jack into the Headset port
located on the back of the IP phone.
2. Dial
317
(Headset on/off). HEADSET MODE ON appears.
To turn off Headset Mode and activate the handset and speakerphone:
Dial 317
(Headset on/off). HEADSET MODE OFF appears.
NOTES
The headset must be hearing aid compatible (HAC).
If your headset has a power-saver mode, make sure the system administrator has
enabled the “Headset Connect Tone” feature. If this is not enabled, you may miss
the first few seconds of an incoming call.
If your headset has a power-saver mode, make sure the system administrator has
enabled the “Headset Connect Tone” feature. If this is not enabled, you may miss
the first few seconds of an incoming call.
NOTE
Because Headset Mode disables the handset and speakerphone, you
must turn off Headset Mode before you can use the handset or
speakerphone.
must turn off Headset Mode before you can use the handset or
speakerphone.