Sharp SJ-SC440V ユーザーズマニュアル

  Keep adequate ventilation space around the refrigerator.

The figure shows the minimum required space for 

• 

installing the refrigerator. The measurement condition 

of power consumption is conducted under a different 

space dimension. 
By keeping greater space, the refrigerator may be 

• 

operated under a less amount of power consumption.
If using the refrigerator in the smaller space dimension 

• 

than the below figure, it may cause the temperature 

rise in the unit, loud noise and failure. 

  Use the two front adjustable feet, to ensure that the  

refrigerator is positioned firmly and flat on the floor.

  Remove the 2 screws of the cabinet lower part, and 

then set the foot cover (supplied inside the refrigerator 

compartment) with removed 2 screws.

Position your refrigerator so that the plug is accessible.  

• 

Keep your refrigerator out of direct sunlight.

• 

Do not place next to heat generating appliance.

• 

Do not place directly on the ground. 

• 

Provide suitable stand.  

or more 

or more 

90 mm   

or more 

SJ-GC440V

SJ-GC480V

SJ-SC440V

SJ-SC480V

Clean the inside parts with a cloth soaked in warm water.

If soapy water is used, wipe it off thoroughly with water.

The casters allow the refrigerator to move back and forth.

• 

Carry the refrigerator by holding the handles located on 

• 

the rear and the bottom.

Free standing type

This refrigerator is provided with an indicator of temperature in the refrigerator compartment to allow you to control the average 

temperature in the coldest zone.

The symbol indicates the coldest zone in the 

refrigerator compartment.

(The door pocket positioned at the same 

height isn't the coldest zone.)

You can carry out regular checks to ensure the temperature 

in the coldest zone is correct and, if  necessary, adjust the 

refrigerator temp. control.

To maintain a correct temperature inside the appliance, 

check that the indicator of temperature is always BLUE.

If the indicator of temperature turns WHITE, the temperature 

is too high; in this case, increase the refrigerator temp. 

control setting and wait for 6 hours before checking the 

indicator of temperature again.

The internal temperature of the refrigerator depends on 

• 

various factors such as the ambient temperature of the 

room, the amount of food stored and the frequency of door 

opening.

When fresh food has been introduced or the door has been 

• 

left open for some time, it is normal for the indicator of 

temperature to turn WHITE.

Correct setting

Temperature too high, 

adjust the refrigerator temp. 

control.

(B191)-West.indb   2

2011/03/14   13:13:12