Sharp R-520D ユーザーズマニュアル

O T H E R   C O N V E N I E N T   F E A T U R E S

Should you discover that you like any of the SENSOR
COOK, INSTANT ACTION or COMPU DEFROST
settings slightly more done, touch the POWER LEVEL
pad once after touching your choice of pads.

The display will show    

   .

Should you discover that you like any of the SENSOR
COOK, INSTANT ACTION or COMPU DEFROST
settings slightly less done, touch the POWER LEVEL
pad twice after touching your choice of pads.

The display will show    

   .

The  POWER LEVEL pad must be touched within 1
second of touching your choice of pads.

If the food that you wish to defrost is not listed on the
CompuDefrost Chart or is above or below the limits in
the “Amount” column on the CompuDefrost Chart, you
need to defrost manually.

You can defrost any frozen food, either raw or previ-
ously cooked, by using Power Level 3. Follow the
exact 3-step procedure found under Time Cooking
on page 9. Estimate defrosting time and press 3
for 30% when you select the power level.

For either raw or previously cooked frozen food the
rule of thumb is approximately 4 minutes per pound.
For example, defrost 4 minutes for 1 pound of frozen
spaghetti sauce.

Always stop the oven periodically to remove or sepa-
rate the portions that are defrosted. If food is not
defrosted at the end of the estimated defrosting
time, program the oven in 1 minute increments on
Power Level 3 until totally defrosted.

When using plastic containers from the freezer, defrost
only long enough to remove from the plastic in order
to place in a microwave-safe dish.

To demonstrate, touch CLOCK, the number  0  and
touch START and hold for 3 seconds. 

will

appear in the display. Cooking operations and specific
special features can now be demonstrated with no
power in the oven. For example, touch MINUTE PLUS
and the display will show   

    and count down

quickly to   

   .

To cancel, touch CLOCK, then the number  0  and
STOP/CLEAR. If easier, unplug the oven from the
electrical outlet and replug.

Your oven can be programmed for up to 4 automatic
cooking sequences, switching from one power level
setting to another automatically.

Sometimes cooking directions tell you to start on one
power level and then change to a different power
level. Your oven can do this automatically.

Suppose you want to cook roast beef for 5 minutes
at 100% and then continue to cook for 30 minutes
at 50%.

P R O C E D U R E

Then enter second
cooking time. Touch
POWER LEVEL pad.
Touch number pad 5 for
50% power.

First enter cooking time.
Then touch POWER
LEVEL pad twice for
100% power.

1. If POWER LEVEL pad is touched twice,  

  will

be displayed.

2. If 100% is selected as the final sequence, it is not

necessary to touch the POWER LEVEL pad.

3. If you wish to know power level, simply touch the

POWER LEVEL pad. As long as your finger is touch-
ing the POWER LEVEL pad, the power level will be
displayed.

5

0

0

x 2

3

0

0

0

5

Touch START pad.

Suppose you want to time a 3 minute long distance
phone call.

P R O C E D U R E

Touch KITCHEN TIMER
pad.

Enter time.

3

0

0

Touch START pad.