Sharp R-63ST ユーザーズマニュアル
GB-8
MICROWAVE POWER LEVELS
SETTING
THE
CLOCK
Your oven has a 24 hour clock mode.
1. Press the CLOCK SET/ DELAY START button once. The hour fi gure will fl ash and the clock indicator will light up.
2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23.
3. Press the CLOCK SET/ DELAY START button, the minute fi gure will fl ash.
4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be
1. Press the CLOCK SET/ DELAY START button once. The hour fi gure will fl ash and the clock indicator will light up.
2. Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23.
3. Press the CLOCK SET/ DELAY START button, the minute fi gure will fl ash.
4. Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be
within 0-59.
5. Press the CLOCK SET/ DELAY START button to start the clock. The icon “:” of the digital time will be fl ashing
on the display and the clock indicator will disappear.
NOTES:
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will show "0:00".
• To check the time of day during a cooking process, press CLOCK SET/ DELAY START button and the LED will
display the time of day for 2-3 seconds. This does not aff ect the cooking process.
• In the process of clock setting, if the STOP button is pressed, the oven will go back to the former setting.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show
"0:00" after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
day will also be erased.
Your oven has 5 power levels and to set the power follow the instruction below:
To set the power level
LED Display
Microwave Power
• Press the MICROWAVE/GRILL/MIX GRILL button
once, P 100 will be displayed and at the same time
the microwave indicator and high heat indicator
will light up on the display.
the microwave indicator and high heat indicator
will light up on the display.
• Rotate the ENTRY dial to change the power level
until the oven indicates the desired level.
• Press the MICROWAVE/GRILL/MIX GRILL button
to confi rm the setting, enter the cooking time and
then press the START/+1min button (
then press the START/+1min button (
) to
start the oven.
• To check the power level during cooking, press
the MICROWAVE/GRILL/MIX GRILL button, the
current power level will be displayed for 4 seconds.
The oven will continue to count down although
the display will show the power level.
current power level will be displayed for 4 seconds.
The oven will continue to count down although
the display will show the power level.
HIGH = 100%
MEDIUM HIGH = 80%
MEDIUM = 50%
MEDIUM LOW = 30%
LOW = 10%
Generally the following recommendations apply:
P100 - (HIGH output = 800 W) used for fast cooking
or reheating e.g. for casseroles, hot beverages,
vegetables etc.
P80 - (MEDIUM HIGH output = 640 W ) used for longer
cooking of dense foods such as roast joints, meat loaf
and plated meals, also for sensitive dishes such as
sponge cakes. At this reduced setting, the food will
cook evenly without over cooking at the sides.
or reheating e.g. for casseroles, hot beverages,
vegetables etc.
P80 - (MEDIUM HIGH output = 640 W ) used for longer
cooking of dense foods such as roast joints, meat loaf
and plated meals, also for sensitive dishes such as
sponge cakes. At this reduced setting, the food will
cook evenly without over cooking at the sides.
P50 - (MEDIUM output = 400 W ) for dense foods
which require a long cooking time when cooked
conventionally, e.g. beef casserole, it is advisable to
use this power setting to ensure the meat will be
tender.
P30 - (MEDIUM LOW output = 240 W Defrost setting)
to defrost, select this power setting, to ensure that
the dish defrosts evenly. This setting is also ideal for
simmering rice, pasta, dumplings and cooking egg
custard.
P10 - (LOW output = 80 W) For gentle defrosting, e.g.
cream gateaux or pastry.
which require a long cooking time when cooked
conventionally, e.g. beef casserole, it is advisable to
use this power setting to ensure the meat will be
tender.
P30 - (MEDIUM LOW output = 240 W Defrost setting)
to defrost, select this power setting, to ensure that
the dish defrosts evenly. This setting is also ideal for
simmering rice, pasta, dumplings and cooking egg
custard.
P10 - (LOW output = 80 W) For gentle defrosting, e.g.
cream gateaux or pastry.