Sharp R-63ST ユーザーズマニュアル

GB-3

ENGLISH

OVEN
1.   Oven lamp
2. Control 

panel

3. 

Waveguide cover (DO NOT REMOVE)

4.   Turntable motor shaft
5.   Oven cavity
6. 

Door seals and sealing surfaces

7. 

Door safety latches

8.   Door handle 
9.   Grill heating element
10.   Power supply cord 
11. Ventilation 

openings

12. Outer 

cabinet

ACCESSORIES:
Check to make sure the following accessories are 
provided:
(13) Turntable (14) Turntable support (15) Coupling 
(16) Rack
Place the coupling into the turntable motor shaft 
and then place the turntable support in the centre 
of the oven floor so that it can freely rotate around 
the coupling. Place the turntable onto the turntable 
support so that it locates firmly into the coupling. 
To avoid turntable damage, ensure dishes and 
containers are lifted clear of the turntable rim when 
removing them from the oven.
For use of the rack, refer to the grilling sections on 
page GB-10.
Never touch the grill when it is hot.

NOTE: When you order accessories, please mention 
two items: part name and model name to your 
dealer or SHARP authorised service agent.

NOTES:
•  The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not 

damaged.

•  Always operate the oven with the turntable and turntable support fitted correctly. This promotes thorough, 

even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage to the 
oven.

•  All food and containers of food are always placed on the turntable for cooking.
•  The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you start the 

oven. This does not affect cooking performance.