Maytag AOES3030 ユーザーズマニュアル
Component Testing Information
!
WARNING
To avoid risk of electrical shook, personal injury or death: disconnect power to oven before servicing, unless
testing requires it.
testing requires it.
16021875 Rev. 0
©2003 Maytag Appliances Company
12
Illustration Component
Test
Procedure
Results
ERC4800 Controlled
Child lock out
This is a safety feature that can be
used to prevent children from
accidentally programming the oven. It
disables the electronic oven control.
Press and hold Bake and Cook Time
for 10 seconds. “OFF” will display
where the temperature normally
appears.
used to prevent children from
accidentally programming the oven. It
disables the electronic oven control.
Press and hold Bake and Cook Time
for 10 seconds. “OFF” will display
where the temperature normally
appears.
To reactivate the control, press and
hold Bake and Cook Time for 10
seconds. Child lockout features must
be reset after a power failure.
hold Bake and Cook Time for 10
seconds. Child lockout features must
be reset after a power failure.
E17
E16
E11
E10
E13
E12
E18
E3
E2
E14
E15
E6
E7
E8
E9
E4
E5
E19
K10
K11
K4
K2
K5
K6
K3
K1
Oven
Light
Light
Panel
Light
Light
Bake
Broil
Conv.
Element
Element
Door
Lock
Lock
Conv.
Fan
Fan
Double
Line Brk
Line Brk
E1
Relay board
Listen for relay to actuate.
Verify input and output power.
Verify input and output power.
If relay does not actuate, verify power to
relay.
relay.
ERC/Adapter board
assembly
assembly
F1 - Control malfuction.
Replace ERC.
Field Selectable Options
Standard: The standard setup is 8. This is a 12 hour type of clock, 60 Hz line frequency and an oven with a
convection fan.
Clock Time Format
12 or 24 hour format
The time of day and the stop time can be displayed in either a 12 or 24 hour format. The control will come in a 12
hour format and can be changed to a 24 hour format from the front control panel.
Clock Time Base
hour format and can be changed to a 24 hour format from the front control panel.
Clock Time Base
60 or 50 Hz input line frequency
This is a time reference for the clock, timer, and internal timing of the control. The control will select the frequency
automatically when the control is powered up.
Selecting Options
In order to select the field selectable options, Press and hold the CLOCK pad on power up of the control. To change
the options press one of the slew pads until the desired option appears and in approximately 9 seconds the control
will change to the normal operation or once selected press the CANCEL pad. The right time digit will indicate the
current options selected as listed in the table below. (Standard setting is 8.)
automatically when the control is powered up.
Selecting Options
In order to select the field selectable options, Press and hold the CLOCK pad on power up of the control. To change
the options press one of the slew pads until the desired option appears and in approximately 9 seconds the control
will change to the normal operation or once selected press the CANCEL pad. The right time digit will indicate the
current options selected as listed in the table below. (Standard setting is 8.)
Code Number
24 Hour Clock
50 Hz
No Convection Fan
8
9 X
H
X
r X X
o
X
d X
X
−
X X
Blank X X
X
X = indicates Selected
= indicates Not Selected