Electrolux EOB 854 ユーザーズマニュアル

Prior to the first use

Daytime setting

When the oven has been connected to the mains and

after failure of electricity, the time display of the electro-

nic autotimer flashes 0.00 and AUTO. The present

daytime has to be set. Without this, the oven cannot be

used. The time display covers the range from 0.01 to

24.00 hours.

Push buttons

and

simultaneously and

hold it.

At a time set the present daytime by pushing
button

forwards or button

backwards.

To make corrections of time (summer--/winter--time,

etc.) simultaneously press the two adjusting buttons

and adjust the actual time with

or .

First cleaning

In order to remove possible production remnants,

clean the appliance once prior to first use.

Remove any possibly existing labels and protective

foils from the front of the appliance.

Clean control panel and oven door with hot water and

a washing-up liquid and dry.

Remove the accessories from the oven and wash

them.

The clean-enammelled cavity has to be washedo with

warm water and a washing-up liquid. Then dry it.

The oven lighting may be switched on for this purpose
by setting the function switch to position .

First heating up

Prior to first use the oven must be heated up

once. Take care for a sufficient space ventilation.

Set function switch to top / bottom heat and temperatu-

re selector knob to 250

Holding this setting, operate the empty and closed

oven for 60 minutes.

250

STOP