Sharp AX-1100R ユーザーズマニュアル

A U T O M A T I C C O O K I N G

Sharp's Sensor is a semi-conductor device that
detects the vapor (moisture and humidity) emitted
from the food as it heats. The sensor adjusts the
cooking times and power level for various foods and
quantities.

Using Sensor Settings:
1. Be sure the exterior of the cooking container

and the interior of the oven are dry. Wipe off any
moisture with a dry cloth or paper towel.

2. The oven works with foods at normal storage

temperature. For example, popcorn would be at
room temperature.

3. Any Sensor Cook selection can be programmed

with More or Less Time Adjustment. See page 29.

4. More or less food than the quantity listed in the

chart should be cooked following the guidelines in
any microwave cookbook.

5. During the first part of cooking with Sensor

function, selected food number will appear on the
display. Do not open the oven door or press Stop/
Clear during this part of the cooking cycle. The
measurement of vapor will be interrupted. If this
occurs, an error message will appear. To continue
cooking, press Stop/Clear and cook manually.
When the sensor detects the vapor emitted from
the food, the remainder of cooking time will appear.
The door may be opened when remaining cooking
time appears in the display. At this time, you may
stir or season food, as desired.

6. If the sensor does not detect vapor properly, Err

will be displayed, and the oven will turn off.

7. Check food for temperature or doneness after

cooking. If food is not completely cooked, enter
additional cooking time manually. Do not repeat
cooking with Sensor function again as food may
overcook.

Covering Foods:
Some foods work best when covered. Use the cover
recommended in the chart.
1. Casserole lid.
2. Plastic wrap: Use plastic wrap recommended for

microwave cooking. Cover dish loosely; allow
approximately

-inch to remain uncovered to

allow steam to escape. Plastic wrap should not
touch food.

3. Wax paper: Cover dish completely; fold excess

wrap under dish to secure. If dish is wider than
paper, overlap two pieces at least one inch to
cover.

Be careful when removing any covering to allow

steam to escape away from you.

* Suppose you want to pop a regular size popcorn with

Standard time.

SENSOR POPCORN CHART

F O O D

P R O C E D U R E

A M O U N T

Popcorn

1. Regular

2. Regular
light

3. Mini

2.9 - 3.5 oz

Use only popcorn
packaged for the
microwave. Try several
brands to decide which
you like. Do not try to
pop unpopped kernels.

1.1 - 1.55 oz

SENSOR COOK

SENSOR POPCORN

P R O C E D U R E

Press Sensor Popcorn once.
The oven starts automatically.
“1” will appear in the display.

NOTE:
To use Sensor Popcorn, press within 3 minutes after
cooking, opening and closing the door or pressing the
Stop/Clear.

Press Sensor Popcorn
once. “1” will appear in
the display.

Press Sensor Popcorn
twice within 2 seconds.
“2” will appear in the
display.

Press Sensor Popcorn
three times within 2
seconds. “3” will appear
in the display.

1 package

2.9 - 3.0 oz

SEC AX1100S_en.indd Sec1:21

10.12.2 0:47:59 PM