Smeg SCA310X ユーザーズマニュアル

 

 

 

Open the door completely and insert the pins (supplied) into the holes 
from the inside. Close the door to an angle of about 45° and lift it off. To 
reassemble, fit the hinges into their grooves, then lower the door into 
place and extract the pins. 

 

 

 

 

The glass in the door should always be kept thoroughly clean. For 
easier cleaning, the door glazing can be fully removed by proceeding as 
described below. After blocking the door in position as described in point 
“8.2  Removing the door”, remove the inner glass using leverage as 
shown in figure 1, and release the 4 pins which fix the glass to the door. 
If your oven also has the middle glass (figure 2) this can simply be lifted 
out. After cleaning, first fit the middle glass (if featured on your oven) 
and then replace the inner glass, using the oven door supports as a 
fulcrum as shown in figure 3 (see detail A in figure 3. Once the glass has 
been fitted on the door, apply a little pressure against the 4 fixing pins. 
If the door should close during these operations, simply relock one of 
the hinges as described in point “8.2 Removing the door”. The panes of 
glass can now be washed separately.