Liebherr 7080 904-00 ユーザーズマニュアル
9
Malfunctions
Your appliance is designed and manufactured for a lengthy, reliable
operating life with no malfunctions. If a malfunction nonetheless
occurs during operation, check whether it is due to an operating
error. Please note that even during the warranty period the resultant
servicing costs in this case will have to be borne by the owner.
operating life with no malfunctions. If a malfunction nonetheless
occurs during operation, check whether it is due to an operating
error. Please note that even during the warranty period the resultant
servicing costs in this case will have to be borne by the owner.
You may be able to rectify the following faults by checking
the possible causes yourself:
the possible causes yourself:
• Appliance does not function: the control lamps are not lit.
– Is the appliance switched on?
– Is the plug correctly fi tted in the mains socket?
– Is the socket fuse intact?
• Loud running noise:
– Is the appliance set up fi rmly on the fl oor?
– Does the appliance cause nearby items of furniture or objects to
– Is the appliance switched on?
– Is the plug correctly fi tted in the mains socket?
– Is the socket fuse intact?
• Loud running noise:
– Is the appliance set up fi rmly on the fl oor?
– Does the appliance cause nearby items of furniture or objects to
vibrate? Please note that noises caused by the refrigerant circuit
cannot be avoided.
cannot be avoided.
• The temperature is not low enough:
– Is the temperature setting correct (see "Setting the tempera-
– Is the temperature setting correct (see "Setting the tempera-
ture")?
– Have excessive amounts of fresh food been placed in the appli-
ance? Observe the temperature display for a further 24 hours.
– Does the separately installed thermometer show the correct
reading?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
– Is the appliance set up too close to a heat source?
If none of the above causes apply and you cannot rectify the fault
yourself, contact the nearest customer service department.
yourself, contact the nearest customer service department.
Please state the
appliance designation
appliance designation
1
,
service number
2
,
appliance number
3
of the rating plate (see fi g.)
.
The type plate is located in the
freezer compartment on the left-
hand inside wall, next to the top
freezer drawer. Keep the door
closed if there is a fault. This will
stop cold from escaping and the
temperature from rising.
freezer compartment on the left-
hand inside wall, next to the top
freezer drawer. Keep the door
closed if there is a fault. This will
stop cold from escaping and the
temperature from rising.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch it
off and disconnect the plug or remove the fuse. Clean the appliance
and leave the door open in order to prevent unpleasant smells.
off and disconnect the plug or remove the fuse. Clean the appliance
and leave the door open in order to prevent unpleasant smells.
The refrigerant circuit has been tested for leaks.
The appliance complies with current safety regulations and
EC directives 2006/95/EC and 2004/108/EC.
The appliance complies with current safety regulations and
EC directives 2006/95/EC and 2004/108/EC.
All types and models are subject to continuous improvement and
the manufacturer therefore reserves the right to make modifi ca tions
to the shape, equipment and technology.
the manufacturer therefore reserves the right to make modifi ca tions
to the shape, equipment and technology.
Changing over door hinges
Fig. T: You can change over the door hinges if necessary.
Follow the order of the positions illustrated in fi g. T.
Follow the order of the positions illustrated in fi g. T.