Nesco CC-32 ユーザーズマニュアル

2

English

1.  Read and understand all instructions and keep for future reference.
2.  Remove all packaging and labels.
3.  Clean all parts, except Base, following the instructions in the ‘Care and Cleaning ’ section. 

4.  Wipe the Base with a damp cloth. NEVER IMMERSE THE BASE IN WATER OR ANY OTHER 

LIQUID.

1.  Place base on a flat, stable surface. Be sure the unit is disconnected from electrical outlet 

before installing or removing any components.

2.  Place Shaving Chamber into Base and ensure it is seated on the Shaft (Fig. 1).

3.  Twist shaft counter-clockwise to lock Ice Chamber into place (Fig. 2).

4.  Place Mixing Paddle into Ice Bowl. (Fig 3). If mixing 

with ingredients, put ingredients into Ice Bowl.

5.  Insert Ice Bowl into groove on Base, lift slightly and 

turn clockwise until it locks (Fig 4). This will allow 

the mixing paddle to mix ice and ingredients while 

operating.

6.  Turn Selector Knob to desired crushed ice setting.

7.  Place ice into Shaving Chamber, do not exceed 

Maximum fill line. DO NOT USE WHILE EMPTY OR 

WITHOUT ICE BOWL AND LID IN PLACE. 

8.  Plug cord into 120V electrical outlet.

9.  Place Lid onto Base and turn counter-clockwise to 

engage interlock switch (Power On/Off). The unit 

will start and begin to shave ice.

10. Turn the Lid clockwise to stop. Remove Ice Bowl by 

turning counter-clockwise to unlock and slide to remove.

Ο

Ο

 FIN

FIG. 1

FIG. 2

FIG. 3

FIG. 4