John Lewis JLDWS1202 ユーザーズマニュアル

ページ / 40
37
Electrical Connection
Any electrical work required to install this appliance should be car-
ried out by a qualified electrician or competent person.
1
WARNING - This appliance must be earthed.
The manufacturer declines any responsibility should these safety 
measures not be observed.
Before switching on make sure the electricity supply voltage is the 
same as that indicated on the appliance rating plate. 
To isolate the dishwasher from the mains, remove the mains plug. 
Important: The plug must still be accessible after the appliance has 
been installed.
Changing a fuse
The appliance is supplied with a 13amp plug fitted. In the event of hav-
ing to change the fuse in the plug supplied, a 13amp ASTA approved 
(BS 1363A) fuse must be used.
Should the plug need to be replaced 
for any reason, proceed as described 
below. 
The wires on the mains lead are col-
oured in accordance with the fol-
lowing code.
• The wire coloured green and yellow must be connected to the termi-
nal marked with the letter “E“ or by the earth symbol 
 or coloured 
green and yellow.
• The wire coloured blue must be connected to the terminal “N“ or col-
oured black.
• The wire coloured brown must be connected to the terminal marked 
“L“ or coloured red.
• Upon completion there must be no cut, or stray strands of wire 
present and the cord clamp must be secure over the outer sheath.
1
WARNING! A cut off plug inserted into a 13 amp socket is a seri-
ous safety (shock) hazard. Ensure that, if it is necessary to cut off 
the plug, it is disposed of safely and not retained.
Green and Yellow: Earth
Blue:
Neutral
Brown:
Live
Blue
Green & Yellow
Brown
Cord Clamp