Lightolier C7P38MHA プリント
Calculite
®
HID Adjustable Accent
C7P38MHA
Page 1 of 3
7" Aperture, PAR38 Ceramic Metal Halide
Job Information
Type:
Job Name:
Cat. No.:
Cat. No.:
Lamp(s):
Notes:
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
Features
1. Reflector Trim: Low brightness,anodized aluminum with integral flange in
painted white or polished to match inside of cone.
2. Lamp Holder Assembly: Unitized optics insure alignment of lamp and aper-
ture cone. Integral C-shaped media holder accepts up to two 4 3/4" media.
3. Trim Adjustment Mechanism: Provides 45° vertical tilt, 360°+ horizontal
rotation; lockable. Patented EZ-Aim Helical Drive System provides fast and
accurate hot aiming with Philips screwdriver.
accurate hot aiming with Philips screwdriver.
4. Socket: Medium base porcelain socket with nickel plated screwshell,
pulse rated.
5. Frame Housing: Steel, 0.029" (22-Ga.), matte black finish.
6. Frame Vertical Adjustment Mechanism: Accommodates mounting to vir-
6. Frame Vertical Adjustment Mechanism: Accommodates mounting to vir-
tually any ceiling system using pre-installed mounting bars, or 1/2" EMT tub-
ing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
ing (by others). Single locking feature secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below from inside fixture.
7. Mounting Bars: Galvanized steel, 0.048" (18-ga.), pre-installed telescoping
bars extend to 30" long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24" O.C. grid systems. Attaches to steel or wood
joists without accessories.
8. Retention Springs: Rust resistant springs secure trim for quick, tool-less
installation.
9. Ballast / Cover Assembly: Accessible from below and removable without
tools for inspection and ballast replacement .
10. Junction Box: 0.059" (16-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power factor, T.H.D.
<15%, thermally and transient protected, RMI/RFI complies with FCC part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",
-5° F minimum starting temperature, Type 1 Outdoor rating.
<15%, thermally and transient protected, RMI/RFI complies with FCC part 18
non-consumer limits, shut-down circuit at end of lamp life, sound rating "A",
-5° F minimum starting temperature, Type 1 Outdoor rating.
Electrical (cont.)
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
70W MH
M98/M143
120/277
0.67/0.28
78
100W MH M90/M140
120/277
0.90/0.43
110
150MWH M102
120/277
1.40/0.61
167
Magnetic Ballast: 120/277V dual voltage, 60 Hz., encased and potted,
HX-HPF circuit type, high power factor, sound rating “B”, -20° F minimum
starting temperature, Type 1 Outdoor rating.
HX-HPF circuit type, high power factor, sound rating “B”, -20° F minimum
starting temperature, Type 1 Outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
70W MH
M98/M143
120/277
1.90/0.80
94
100W MH M90/M140
120/277
2.40/1.10
125
150W MH M102
120/277
3.70/1.60
180
Options and Accessories
Fuse (magnetic ballast): Add suffix F1 or F2 to Frame-In Kit (F1=120V, F2=277V).
Chicago Plenum: Consult Factory.
Chicago Plenum: Consult Factory.
Labels: UL (Suitable For Damp Locations), CSA (magnetic ballast only), I.B.E.W.
For 150W, install fixtures with minimum spacing: 2 feet from center-to-center
of adjacent luminaries; 1/2 inch from top of luminaire to overhead building member;
1 foot from luminaire center to side building member.
For 150W, install fixtures with minimum spacing: 2 feet from center-to-center
of adjacent luminaries; 1/2 inch from top of luminaire to overhead building member;
1 foot from luminaire center to side building member.
6
1
1
9
8
7
5
4
3
2
5/8" (16 mm)
Vertical Adjustment:
3/4" (25 mm) to
2 7/8" (73 mm)
11 7/8"
(302 mm)
8-3/8" (213 mm) Dia.
7" (178 mm) Dia.
1 1/8" (29 mm) max.
Ceiling Thickness
Ceiling Thickness
C7P38
15" (381mm)
10-5/8"
(270 mm)
20" (508 mm) to
30" (762 mm)
30" (762 mm)
Top View
(Electronic Ballast)
20-1/4" (514 mm)
19-1/8" (486 mm)
Ceiling Cutout: 8” (203mm) Dia.
Reflector Trim
Frame-In Kit
Lamp (Ceramic MH)
C7P38MHA CLW
Specular Clear, White Painted Flange.
CLP
Specular Clear, Matching Flange.
CCDW
Comfort Clear Diffuse, White Painted Flange.
CCDP
Comfort Clear Diffuse, Matching Flange.
CCZW
Champagne Bronze, White Painted Flange.
CCZP
Champagne Bronze, Matching Flange.
C7A70P38E1 Electronic 120V / C7A70P38E2 Electronic 277V
70W PAR38
C7A10P38E1 Electronic 120V / C7A10P38E2 Electronic 277V
100W PAR38
C7A15P38E1 Electronic 120V / C7A15P38E2 Electronic 277V
150W PAR38
C7A70P38U Magnetic 120V/277V
70W PAR38
C7A10P38U Magnetic 120V/277V
100W PAR38
C7A15P38U Magnetic 120V/277V
150W PAR38
Top View
(Magnetic Ballast)
20" (508 mm) to
30" (762 mm)
30" (762 mm)
10-5/8"
(270 mm)
15" (381mm)
19-5/8" (498 mm)
22-1/8" (562 mm)