Husqvarna H348SL ユーザーズマニュアル

1.    Raise and hold defl ector shield in upright position.
2.    Place slot in lower chute over mounting tab on mower 

and position lower chute over mower opening as 
shown.

3.    Hook rear latch into fl ange hole on back of mower.
4.    Hook front latch into tab hole on front of mower.

1.    Lower mower to its lowest cutting position.
2.   Assemble upper chute by inserting curved end into 

hole in back of cover. 

TIP: Holding upper chute as shown and twisting while 
installing in cover will help keep the rubber seal in place.
NOTE: Handle carefully so as not to damage full bag in di -
ca tor. 

3.    Push in and turn upper chute until it is in line with lower 

chute.

4.    Align the bosses on lower chute with alignment slots 

on upper chute and slide together.

5.    Secure with rubber latch by hooking hole in latch over 

latch pin.

Be sure deck is properly leveled for best mower per for -
mance.  See your tractors owner's manual for instruc-
tions.

02552