Makita EH7500S ユーザーズマニュアル

 P 16/ 25

(1) Remove Air cleaner cover. (Fig. 30)

(2) Remove Elements, Sponge and Felt. (Fig. 31)

Air cleaner

cover

Hex socket

head bolt 

Element

(Felt made)

Element

(Sponge made)

Throttle valve

assembly

Pan head screw (small)

Pan head screw (4pcs.)

Carburetor

body assembly

Gasket

Pump diaphragm

Pump body assembly

Metaling

  diaphragm

Gasket

Diaphragm

cover

Inlet

 screen 

DISASSEMBLING, CLEANING

(5) Remove Diaphragm cover, Metaling diaphragm, Gasket set by unscrewing four Pan head screws. (Fig. 33)

      Note: Carefully separate Gasket from Metaling diaphragm in case they stick each other as they are fragile.

(6) Replace Metaling diaphragm to the new one if it has any curing, deformation or breakage.

(3) Remove two Hex socket head bolts fixing Air cleaner plate and Carburetor assembly. (Fig. 32)

      Note: Take off the Hex socket head bolts completely from the machine,

                otherwise, it’s impossible to disassemble Carburetor. 

(4) Remove two tubes and disassemble Carburetor assembly. (Fig. 32)

Hex socket

head bolt 

Air cleaner plate

Carburetor

assembly 

Black

Tube

Clear Tube