Zenoah SRTZ2401 ユーザーズマニュアル
38
9. Maintenance
English
• Make sure that the engine has stopped and is
cool before performing any service to the
machine. Contact with moving cutting head or
hot muffler may result in a personal injury.
machine. Contact with moving cutting head or
hot muffler may result in a personal injury.
■ AIR FILTER
• The air filter, if clogged, will reduce the engine
• The air filter, if clogged, will reduce the engine
performance. Check and clean the filter element in
warm, soapy water as required. Dry completely
before installing. If the element is broken or shrunk,
replace with a new one. (MA3)
warm, soapy water as required. Dry completely
before installing. If the element is broken or shrunk,
replace with a new one. (MA3)
(1) air filter
■ FUEL FILTER
• When the engine runs short of fuel supply, check the
• When the engine runs short of fuel supply, check the
fuel cap and the fuel filter for blockage. (MA4)
(1) fuel filter
■ SPARK PLUG
• Starting failure and mis-firing are often caused by a
• Starting failure and mis-firing are often caused by a
fouled spark plug. Clean the spark plug and check
that the plug gap is in the correct range. For a
replacement plug, use the correct type specified by
RedMax. (MA5)
that the plug gap is in the correct range. For a
replacement plug, use the correct type specified by
RedMax. (MA5)
• REPLACEMENT PLUG IS A NGK CMR7H.
• Note that using any spark plug other than those
designated may result in the engine failing to
operate properly or in the engine becoming
overheated and damaged.
operate properly or in the engine becoming
overheated and damaged.
• To install the spark plug, first turn the plug until it is
finger tight, then tighten it a quarter turn more with a
socket wrench.
socket wrench.
TIGHTENING TORQUE:
78~112 in-lbs
(8.8~12.7 N.m.)
IMPORTANT
WARNING
.025 in
0.655mm
0.655mm
MA5
(1)
MA4
(1)
MA3