Shindaiwa T261X/EVC ユーザーズマニュアル

ページ / 40
3
DO NOT OPERATE THIS UNIT
IF YOU ARE TIRED, ILL OR
UNDER THE INFLUENCE OF
ALCOHOL, DRUGS, OR
MEDICATION.
Work Safely
Shindaiwa trimmers operate at very high 
speeds and can do serious damage or 
injury if they are misused or abused.  
Never allow a person without training or 
instruction to operate this unit!
Stay Alert
You must be physically and mentally fit to 
operate this unit safely. 
WARNING!
Never operate power equipment 
of any kind if you are tired or if you 
are under the influence of alcohol, 
drugs, medication or any other sub-
stance that could affect your ability 
or judgement.
Never make unauthorized  
attachment installations. Do not 
use attachments not approved by 
Shindaiwa for use on this unit. 
General Safety Instructions The Properly Equipped Operator
Always operate with both 
hands firmly gripping the 
unit.
Wear close-fitting clothing to 
protect legs and arms. Gloves 
offer added protection and 
are strongly recommended. 
Do not wear clothing or 
jewelry that could get caught 
in machinery  
or underbrush. 
Secure hair so it is 
above shoulder 
level. NEVER 
wear  
shorts!
Wear hearing protection devices 
and a broad-brimmed hat or 
helmet.
Always wear eye protection such as 
goggles or safety glasses.
Keep away from the rotating trim-
mer line or blade  at all times, and 
never lift a moving attachment 
above waist-high.
Wear appropriate footwear (non-skid 
boots or shoes): do not wear open-
toed shoes or sandals. 
Never operate 
the unit while barefoot!
Keep a proper footing 
and 
do not over-
reach—maintain 
your balance at all 
times during opera-
tion.
Always make sure 
the appropriate 
cutting attachment 
shield is correctly 
installed and in good 
condition.
Figure 1
n
  ALWAYS wear eye protection to 
shield against thrown objects.
n
  NEVER operate the engine 
when transporting the unit.
n
  NEVER operate the engine 
indoors! Make sure there is 
always good ventilation. Fumes 
from engine exhaust can cause 
serious injury or death.
n
  ALWAYS clear your work area 
of trash or hidden debris that 
could be thrown back at you or 
toward a bystander.
n
ALWAYS use the proper cutting 
tool for the job.
n
  ALWAYS stop the engine im-
mediately if it suddenly begins 
to vibrate or shake. Inspect for 
broken, missing or improperly 
installed parts or attachments.
WARNING!                
Minimize the Risk of 
Fire
n
  NEVER smoke or light fires near 
the engine.
n
  ALWAYS stop the engine and 
allow it to cool before refueling. 
Avoid overfilling and wipe off any 
fuel that may have spilled.
n
  ALWAYS inspect the unit for fuel 
leaks before each use. During 
each refill, check that no fuel 
leaks from around the fuel cap 
and/or fuel tank. If fuel leaks 
are evident, stop using the unit 
immediately. Fuel leaks must be 
repaired before using the unit.
n
  ALWAYS move the unit to a place 
well away from a fuel storage 
area or other readily flammable 
materials before starting the en-
gine.
n
  NEVER place flammable material 
close to the engine muffler.
n
  NEVER operate the engine with-
out the spark arrester screen in 
place.
WARNING!
WARNING!  Use Good Judgment
n
  NEVER extend trimming line be-
yond the length specified for your 
unit.
n
  ALWAYS keep the unit as clean 
as practical. Keep it free of loose 
vegetation, mud, etc.
n
  ALWAYS hold the unit firmly with 
both hands when cutting or trim-
ming, and maintain control at all 
times.
n
  ALWAYS keep the handles clean.
n
  ALWAYS disconnect the spark 
plug wire before performing any  
maintenance work.
n
  ALWAYS, if a saw blade should 
bind fast in a cut, shut off the 
engine immediately. Push the 
branch or tree to ease the bind 
and free the blade.