Creative 4351FCT ユーザーズマニュアル
6
ENGLISH
Explanation of general view
1
Cutting action changing lever
2
Switch lever
3
Speed adjusting dial
4
Tool opener
5
Blade clamp
6
Jig saw blade
7
Protrusions
8
Base
9
Hex wrench
10
Cutting line
11
Bolt
12
Graduation
13
Bevel slot
14
Gear housing
15
V-notch
16
Starting hole
17
Dust nozzle
18
Hose for vacuum cleaner
19
Rip fence
20
Fence guide
21
Threaded knob
22
Circular guide pin
23
Rule bar
24
Screw
25
Guide rail adapter
26
Guide rail
27
Cover plate
28
Anti-splintering device
SPECIFICATIONS
Model
4351T
4351CT
4351FCT
Length of stroke............................................................. 26 mm
26 mm
26 mm
Max. cutting capacities
Wood .......................................................................... 135 mm
135 mm
135 mm
Steel ........................................................................... 10 mm
10 mm
10 mm
Aluminum ................................................................... 20 mm
20 mm
20 mm
Strokes per minute (min
–1
) ........................................... 2,800
800 – 2,800
800 – 2,800
Overall length ................................................................ 271 mm
271 mm
271 mm
Net weight ..................................................................... 2.4 kg
2.5 kg
2.5 kg
Safety class ...................................................................
/II
/II
/II
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
For your own safety, please refer to the enclosed safety
instructions.
SPECIFIC SAFETY RULES
GEB016-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
ence to jig saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
(gained from repeated use) replace strict adher-
ence to jig saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1.
Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord.
faces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord.
Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock the
operator.
operator.
2.
Use clamps or another practical way to
secure and support the workpiece to a stable
platform.
secure and support the workpiece to a stable
platform.
Holding the work by hand or against your
body leaves it unstable and may lead to loss of con-
trol.
trol.
3.
Always use safety glasses or goggles. Ordi-
nary eye or sun glasses are NOT safety
glasses.
nary eye or sun glasses are NOT safety
glasses.
4.
Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
nails and remove them before operation.
5.
Do not cut oversize workpiece.
6.
Check for the proper clearance beyond the
workpiece before cutting so that the blade
will not strike the floor, workbench, etc.
workpiece before cutting so that the blade
will not strike the floor, workbench, etc.
7.
Hold the tool firmly.
8.
Make sure the blade is not contacting the
workpiece before the switch is turned on.
workpiece before the switch is turned on.
9.
Keep hands away from moving parts.
10. Do not leave the tool running. Operate the
tool only when hand-held.
11. Always switch off and wait for the blade to
come to a complete stop before removing the
blade from the workpiece.
blade from the workpiece.
12. Do not touch the blade or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
extremely hot and could burn your skin.
13. Do not operate the tool at no-load unneces-
sarily.
14. Some material contains chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material sup-
plier safety data.
tion and skin contact. Follow material sup-
plier safety data.
15. Always use the correct dust mask/respirator
for the material and application you are work-
ing with.
ing with.
SAVE THESE INSTRUCTIONS.